Usb mobile device

Hi Frank try to transfer those songs from your computer with the use of USB or pair the device with the bluetooth:
USB:- connect your phone with the USB to the charging port, once device is detected try to move files (your computer will ask you anyway which disc/or device would you like to transfer them?
Bluetooth: you have to add pair your phone to your computer first by adding device to your bluetooth in you pc.. once your phone is added to paired devices you'll find an option to "send files to your phone"
feel free to comment back should you need further clarification how to do it. thnx

Open device manager on pc goto to ports section while mobile attached with usb there should be Mobile port line right click it choose uninstall remove usb restart computer reconect usb and mobile everything should be ok

But there is a software i would personally recommend to you.

Name of software is "Sakis3g". It can connect to mobile phones and other mobile devices which can be detected by linux kernel. You can use IR, Bluetooth, even USB cable to connect to your device.

You can use this software for the following

1. connect to mobile devices by IR, bluetooth, USB Cable
2. Send and receive files between computer and device
3. Access Internet from Device by Dial Up Networking
4. Browse files on Mobile device
5. Mount the mobile device on a user specified mount point or communication port.
   Usually it mounts connected mobile device to /dev/rfcomm0. Through this port, you can communicate with the device .
6. Connect to USB Modem (Like Reliance DataConnect, TATA Photon, IDEA Netsetter etc.)
7. ability to connect to any locked/unlocked USB Internet Modems (Zero Devices)
8. fully automated connection setup. No manual input is needed except to specify connection name.

You can find more details and download Sakis3g from this address

Sakis3g Homepage may not specify anything about connecting a mobile phone to computer and using it as an Internet Modem, but trust me its possible. Meanwhile I'm posting this by using DUN with the help of this script.

• Just Run the script
• choose Connect
• Select Bluetooth
• It will search for a new bluetooth device
• Once your phone is detected, Select it and press ok
• when it asks for APN (Access Point Name) provide it
• When it asks for user name and password, Provide it. If your service provider do not need any username and password to access internet , Don't just leave it as blank (Program doesn't accepts empty user name and password. you just press space and enter)
• Once all necessary informations are entered program may simply closes. Don't worry your connection manager will show this new connection entry.
  
  
• To Disconnect the connection , you can select Disconnect option in Sakis3g.
  

hope this will help you to solve your issue.

hi...

many mobile phone companies dont provide drivers for linux.

But there is a software i would personaly recommend to you. Actually its not a software, its a shell script.
Name of software is "Sakis3g". It can connect to mobile phones and other mobile devices which can be detected by linux kernel. You can use IR, Bluetooth, even USB cable to connect to your device.

You can use this software for the following

connect to mobile devices by IR, bluetooth, USB Cable

1. Send and receive files between computer and device
   
2. 
   Access Internet from Device by Dial Up Networking
   
   
3. Browse files on Mobile device
   
   
4. Mount the mobile device on a user specified mount point or communication port.
   usually it mounts connected mobile device to /dev/rfcomm0. Through this port, you can communicate with the device .
   

Connect to USB Modem (Like Reliance DataConnect, TATA Photon, IDEA Netsetter etc.)

1. ability to connect to any locked/unlocked USB internet Modems (Zero Devices)
   
   
2. fully automated connection setup. No manual input is needed except to specify connection name.

You can find more details and download Sakis3g from this address
http://www.linuxconfig.org/mobile-broadband-connection-and-sakis3g





hope this will help you to solve your issue.

1. 
   
   

First make sure your computer has the latest install of Microsoft Activesync Fow win xp click here For Vista or 7 use this "windows mobile device center" Then conect this port (below) to your computer with a usb cable. It should have come with your phone. Then you can browse the device using "my computer" and it should show up as an additional drive letter or "mobile device" See pic, its the only port on this end,

1. Go to the Windows Desktop, click on the "Start" button, and then click "Run" or "Start Search" if you are using the Windows Vista operating system. 2. Type the following text into the text box: 3. "devmgmt.msc" Click OK. 4. Select your computer when the Device Manager window opens, and then select "Action" from the options at the top of the window. 5. Choose the "Scan for hardware changes" option from the drop down menu that appears. 6. Insert any USB device such as a mouse or flash drive into the USB port in question. Now simply check the USB device to see whether it is working in order to test the port. Try resetting the device it?s usually a small pinhole on the back or side of the device try holding that in for about 10 seconds OR Try reflashing the firmware for your device you can find the latest firmware and flashing utilities from the manufacturers website. Make sure that you back your music up first because when you do this you are setting it back to factory settings.

WINDOWS XP SP3 CAN'T KNOW MY NOKIA PHONE ,IT REQUEST THE DRIVER MT 6225 FOR NOKIA E71i .................. pls help

Some USB devices draw excessive power from the USB port, especially USB scanners. When this happens you need a powered USB hub, connect this to your computer's USB port and connect the USB device into the powered USB hub, you should not have any further error power surge problems.

You don't need a driver for this MP3 player in order for it to be recognize by your computer, just need to connect it properly to a USB port on your computer and wait for about 30 seconds to a minute for your computer to fully recognize and install the necessary drivers that it needs, if its not recognize by the computer try to connect it on a different USB port on your computer....

I'm cannt to connect my digital camera to my windows via USB port. after this, I received message : The drivers for this device are not installed (code 28), what can I do?
Thx...