Question about Canon PIXMA MP160 All-In-One InkJet Printer

4 Answers

Problem absorber full

I have problem for my cannon mp 145 its became absorber full anyone can help me

Posted by on

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

Here and hope you find it useful. use the mp150 procedure

Posted on May 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

With the Canon PIXMA MP150 I found that the colour button fix was best for removing the error message. There is no such thing as an absorber tank. The print cartridges come to rest against a pad each of the 2 pads has a suction pump attached to its underside and this feeds down to the base of the machine where there is a corner boxed off by pads to soak up the residue. None of this has any electronic sensors so "Tank Full" must come a count of the number of times the system is purged.

Posted on Jun 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

From Google, they say this When you often do deep cleaning and cleaning for your printer, the waste ink tank will be full and you will get E8 on the control panel.  It’s means your waste ink tank is full.  To fix this you must empty waste ink tank it will be permanent fix for E8 error message.  But if you are not a technician you can ignore this message by pressing Color Copy Button, It will help for a while but not forever.
My experienced, This message will appear when you turn on your printer, press 1 Color copy button.  But when you turn off your printer and turn on again the message will appear again.
I suggest you to bring your printer to the service center or technician to permanent clear the error message.

Posted on May 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
problem absorber full - 75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

pow-e-r-6

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ink absorber is almost full (Cannon MP 145)


Hello,
for first aid you can reset it in service mode.
Service mode operation procedures:
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)

Then press 4 times the reset button and then press 2 times the reset button.

NOW YOU RESETED THE WASTE INK AND PLATEN WASTE INK ABSORBER.
BE SURE TO CHANGE THE WASTE INK ABSORBERS TO PREVENT THE INK SPILL OUT.

Hope that helps!

Apr 29, 2011 | Office Equipment & Supplies

1 Answer

I have a cannon mp 145 printer, but ink absorber is full


this printer isnt and easy fix of changing the waste ink absorber. You will need to take it into a Canon repair center and have them do it. It should take them no longer then an hours labor and the cost of the kit to fix. If you think you can technically do it yourself you can find the parts on ebay and the service manual. But be warned this can be a messy job and could possibly not work if you dont really know what your doing.


Best of luck...

Nov 22, 2010 | Canon PIXMA MP150 All-In-One InkJet...

4 Answers

I wish a install driver of canon mp 145


Get the latest driver for your printer at www.canon.com/suport ... make sure it is for your operating system ...

May 02, 2010 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Erro code on printer



Error code means
E27 = Waste ink absorber full or platen waste ink absorber full

Yes, you can do this yourself.

YOu can do a search on here for the error code, there are instructions on how to reset the error and clean the absorber..

Or you can do a search for the "SERVICE" manual for your printer and order it, then follow it's instructions to clean the pads and reset the error.

Let me know if you can't find the solution on here, and I will post it for you.


Aug 31, 2009 | Office Equipment & Supplies

1 Answer

My printer canon mp 145 shock absorber is full


hello
Plz check the buffer of ur printer if it contains any information select all and delete it and empty the printer queue.

thank u

Feb 27, 2009 | Canon MF8180C Color Laser MFC Printer

2 Answers

Printers Problem Canon MP 145 code E27


Try this fix.....CLICK HERE

It works the same for the Canon MP 150 or MP 160

Jan 25, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Mp 145


Hi this works with some canon priters try ir
codes for reset:

1. Press and hold the POWER button
2. Turn off the printer by disconnecting the printer power cable,
3. turn on the printer, still holding the POWER button
The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
7. Reconnect the printer cable.
8. And it should be reset.
All best: Pineworks

Jan 25, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

How i can update or reseter canon mp 145 , waste ink absorber full


If I understand you questin corrctly. THeir is nothing wrong with the printer except that the drip tray is full? Take paper towels and absorb the excess ink . 
I have included your Canon support web page in case it was something else that you needed. 
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=12764

Jan 10, 2009 | Canon PIXMA MP150 All-In-One InkJet...

5 Answers

Canon mp 145


..its instruction how to reset a canon pixma 145

May 09, 2008 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP160 All-In-One InkJet Printer Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1975 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...