Question about Fisher and Paykel GWL11 Top Load Washer

2 Answers

Fault 49 smartdrive

What is fault 49 on the fisher and paykel smart drive washing machine mean please

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Hi have had this problem on phase 5 grey controller, on the controll board near where the valve hot and cold wires are connected you will see a small usually blue resistor value approx 5ohms this is probably open circuit replace it check your water valves before reconnecting I was fortunate enough to have plenty of spare valves so I just replaced both valves as I suspect a faulty one may have damaged resistor machine has been working fine for some time since

Posted on Jul 11, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

My paperwork says fault #49 is hot and/or cold water valve faulty. Check that the valve harnesses are connected connected correctly or check that the valve is not an open circuit.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Intuitive Eco - code 49. What does that mean?


faulty cold water valve, if that doesnt fix it then fault computer board

Feb 27, 2015 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher paykel washing machine fuse smartdrive


All Fisher & Paykel top load washers have 4Amp fuse for 240vac.

Apr 05, 2014 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Error code 49 f&p aqua smart wl80t65c


49 is a cold water valve fault. test the valve for voltage while filling, it should be recieving 24V. if not, the problem lies with the motor controller.

Aug 30, 2013 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher paykel aquasmart fault 49


Fault code 49 is water valves, But the Aqua-Smart board is outputting the wrong code here, The Smart pump has blown the water valves fuse, A common thing in Aqua-Smart Machines.
The Smart pump has jammed with lint and caused over current to the board and taken out parts on the board that drive the pump.
Best to get a new/recondition board for your machine.

Apr 20, 2013 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Fisher paykel aqua smart fault 49


Fault code 49 is water valves, But the Aqua-Smart board is outputting the wrong code here, The Smart pump has blown the water valves fuse, A common thing in Aqua-Smart Machines.
The Smart pump has jammed with lint and caused over current to the board and taken out parts on the board that drive the pump.
Best to get a new/recondition board for your machine.

Apr 20, 2013 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Fisher and paykel toploader washing machine fault 49 water valves all show 60 ohms next step?


Fault code 49 is water valves, But the Aqua-Smart board is outputting the wrong code here, The Smart pump has blown the water valves fuse on it's overload, A common thing in Aqua-Smart Machines i always keep seeing,
The Smart pump has jammed with lint and caused over current to the board and taken out parts on the board that drive the pump.
Best to get a new/recondition board for your machine.

Nov 26, 2012 | Fisher and Paykel Washing Machines

1 Answer

Fisher@paykel aqua smart washer shows fault code49.


Fault 49 on F&P agitator models is bad cold water valve or wires on it disconnected.

Apr 25, 2012 | Fisher and Paykel Washing Machines

1 Answer

Error code 49 on fisher and paykel 8kg aqua smart washing machine, model number: wl80t65cw1. What does this mean?


Hi just read your posting.Error code 49 means the computer has measured a voltage from the valve diagnostic circuit that indicates the cold valve is faulty.Would you like help in confirming that the cold valve is faulty?You need an electrical test meter.Please reply and I can guide you thru the testing procedure.Looking forward to your reply.

May 15, 2011 | Fisher and Paykel Washing Machines

1 Answer

Fisher Paykel washing machine Smartdrive 703 Advance, Power and Start buttons are non responsive when pushed. Is there a part that can fix this. Does the control panel have to be replaced?


Fisher & Paykel Smart Drive beeps and stops during rinse cycle. If I hit pause and wait and restart it eventually continues. It seems like it has problems detecting water level.

Apr 13, 2011 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

michael_t919

Level 2 Expert

88 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...