Question about Hobart A200 Stand Mixer

2 Answers

Reccomendations on how to move a Hobart H600 Mixer

We are moving our restaurant to a new location. Does anyone have suggestions for what to use to move our Hobart 60 qt mixer? Should I use a Hand truck, platform, piano dolly, car dolly? Please give me some ideas. Thank you for taking your time to help us.

Posted by on

  • blueextc3221
    blueextc3221 May 11, 2010

    handtruck with pallet or refrigerator dollie with straps.

    Also (2) "skateboard dollies" with 4 swivel casters ea. will work

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 788 Answers

I would use the 4 wheel platform dollies and ratcheting tie-down straps to secure it to the dollies.
I have used these to move pianos and other larger objects, but make sure that you secure the object to the dolly and get the best one with the biggest wheels that you can find. The bigger the wheel the easier the roll. Not sure how big your doorways are, but if you can use 2 or 3 dollies, that’s what I would recommend. Just make sure that you secure the load with ratcheting straps not just rope.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I have managed to answer your questions and have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot give this post a “FIXYA” (Two Thumbs Up) rating then please comment to this post and I will try to help you further.

I try to provide the best FixYa experience.

Posted on May 23, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

What we do is get the mixer out the best door where a truck can pull in a get it call a car tow truck that has a platform that will come down to the ground and let him pull it to the middle of the truck and secure it.
If you fool around and drop a mixer you can damage the bowl lift on a 60Qt figure a 1000.00
moving it with a hand truck is plain trouble

Posted on Jun 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I needed to know the PH for a h600 11344142 Hobart mixer... And is it a single Or 3 face??


Hello Jbabajanov,

I understand that you want to know about the HP (Horse Power) of a H600, 60 quart mixer and weither it is a single or three phase.

All H600 Hobart mixers are equiped with a 2 horse power motor.

As to wether it is single or three phase you will need to look at the service tag of the machine. If is listed on it weather it is single or three phase.

Thank you for choosing FixYa.com

Justin

May 13, 2011 | Hobart H600 Stand Mixer

1 Answer

What oil can you use for the hobart h600


on the hobart h600 we use 120 oz of 140 weight gear oil.

Mar 04, 2011 | Hobart H600 Stand Mixer

2 Answers

Hobart HZ (h600?) Raising handle is acting up


You will need to confirm the model number. An H600 or L800 have a wheel to manually turn to raise and lower the bowl. The M802 and V1401 hav a belt driven bowl lift clutch, operated by a lever. When you push the lever up or down, you are engaging a small transmission between the motor and main housing. You would need to remove the top cover and see what's happenning. It may be there is something other than the proper spiral pin joining the lift lever to the clutch input shaft, giving alot of backlash and insufficient selector movement.

Aug 18, 2009 | Hobart H600 Stand Mixer

2 Answers

Electrical connection of hobart h600


it requires 3 phase with ground it is a four wire system

Jul 24, 2009 | Hobart H600 Stand Mixer

1 Answer

Oil leaking from shaft after wew moved it


Oil seal around the shaft probably dried up. Before replacing, try penetrating oil at seal, wait a day; if no better, replace seal.

Jun 25, 2009 | Hobart H600 Stand Mixer

1 Answer

Moving our mixer


Offer a free pizza night to your biggest & strongest friends and as they walk in the door tell them they can eat all they want but, they have to move your mixer in return. Most of your larger, well known rental places should have what we call in the business as roller skates or appliance moving casters. They are a tripod type heavy duty caster that is placed under each corner of the mixer and can either be strapped or bolted down. You could also call a local commercial kitchen equip service & install company like Ecolab GCS, they move & install equipment. 800-822-2303

May 15, 2009 | Hobart H600 Stand Mixer

1 Answer

Contact overload for h600 3 phase mixer


I'm a hobar tech and repair these often.The problem is the overload contacts are opening so the motor doesnt burn up.I know the mixer is old and the overload has weakend over time or simply the mixer is being overloaded with too much product.Did you just get this mixer?change the recipe?mixing pizza dough and adding ice?Any new employees if it's in a buisness?

Mar 19, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart 600 wiring connection


The ground wire attaches to the ground lug under the top.

Mar 16, 2009 | Hobart H600 Stand Mixer

1 Answer

I need to change gear oil in Hobart H600 mixer.


Take the top cover off,where the front screw on the cover goes in that long shft has to be unscrewed,get a funnel and add oil.

Feb 19, 2009 | Hobart H600 Stand Mixer

1 Answer

Dough Hook Stops moveing under heavy load


Does the mixer work in any other speeds?Are you mixing pizza dough and in what speed?I service these mixers alot--i work for hobart.It sounds to me like you have a sheared key on one of the shafts.The mixer doesnt have a clutch.

Feb 21, 2008 | Hobart H600 Stand Mixer

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

Related Topics:

1,350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1267 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1822 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...