Question about LG Dryers
2: Remove the front door assembly (2 screws holding the hinge to the drier carcase)
3: Remove the top cover (2 screws at the rear, then slide the top backwards and lift off). It's a good idea to remove any fluff from the innards at this point.
5: Remove the cover over the drum bearing and earth strap (2 screws)
6: Remove the cover over the fan assembly (numerous screws)
8: Remove the fan vanes (3 hex screws holding 2 metal flanges that make up the impeller fan)
9: Remove all screws around the rear cover and gently lift it up (I supported one edge with a basin perched on the rear of the drum, it gives access to the motor chassy etc. There's a vent tube that will come dislodged at this point; it's easy to relocate later.
11: Carefully feed the belt past one idler wheel and then over the motor pulley. Slowly turn the drum slightly to encourage the belt to feed round the second idler wheel.
13: Replace the rear cover (make sure the vent tube is seated correctly at front and rear). Tighten all screws.
15: Replace the drum bearing circlip (I took the opportunity of rotating the bearing through 180 degrees). Replace the copper earthing strap.
16: Replace the fan housing cover and drum bearing cover. (Make sure the heating element is free of fluff and crud)
18: Fire up the beast!!! It may smell a little if there's anything still on the heating element.
Posted on May 22, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 01, 2016 | Hotpoint Dryers
Nov 12, 2013 | Hotpoint TVF770 Tumble Dryer
Aug 06, 2013 | Dryers
Jan 17, 2013 | Hotpoint Belt Drum Drive for VTD00, VTD20,...
Feb 24, 2011 | Dryers
Mar 23, 2010 | Hotpoint Dryers
Jan 18, 2010 | Dryers
Sep 09, 2009 | Dryers
Apr 06, 2008 | Dryers
273 people viewed this question
Usually answered in minutes!