Question about Abit SG-71 Motherboard

1 Answer

MOTHER BOARD CONNTIONS

NEED TO PLUG IN USB CONNTIONS AND THE POWER SW ,POWER LED, H.D.D. LED, RESET SW ON THE MOTHERBOARD NEED GOOD PICTURE

Posted by on

  • CONSTANTIN SPYROU May 11, 2010

    If I may humbly give you an advice, it appears to me that you are asking an ant to do an elphantś work. Rule number 1: you never disconnect anything, without making a diagram of how it goes back. #2: you never tinker with what is working. From what you say above, you can very easily change componenets like CD drives etc., but with the motherboard, you should exercise great care. We can help you fix it, but will have to check with management and get their OK. Do you have a desktop or a laptop?

  • CONSTANTIN SPYROU May 11, 2010

    Since you only need information as to the connections, we canonly help you, after I acquire a manual for your motherboard. I must state that they are not easily found and if you can make a copy of it and send it to me, I don't anticipate any problems, as long as we have no damaged parts. Please get back to us....

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 256 Answers

Please, I understand that you feel bad for what happened to you. We are not in the business to console you, but to help you out of what happened. You have attempted to do something that I would not even thing of doing and that is to try to disconnect wiresm without some notes to put them back. Your short description was very difficult to understand. We are here to fix things, which sometimes happen naturally and sometimes they happen because someone dove into the swimming pool before learning how to swim. Forget all that happened. All we want is to fix what you have that does not work. In order that we accomplish this we will need a detailed description of what happened. Then, we can put two and two together and they always come to four. TWO AND TWO MAKE ALWAYS FOUR! what we need is some information, based on which we can duplicate what what happened in the lab. Do you know that before we advise you, we have to duplicate in our lab what happened, so we can undrestand it better. So, please, we want to help you. All we need is the information. Our company "Fixya" gives this as a free servce. Should there be a need of a part, we will give you an estimate, before we move our little finger without your consent. <arzobconst@yahoo.com> My name is Constantin

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power sw reset sw power led hdd led where is located in the mother board intel e 210882?


Hi Dear

For the installation the new motherboard in you PC, click here and find the guide book for mother board installation.


God luck

Sep 08, 2011 | Intel Motherboard

1 Answer

I need to know where to plug in my power cables on the mother board i have 5 cables that need plugged in One is RESET SW, POWER SW, HDD LED, + P LED, and - P LED can you possibly give me a picture pointing...


Can you go to the MSI website and download the manual, looking at your motherboard usually it can be found at the bottom of the motherboard, usually the right side, also you should see small abbreviations of the connection relative to the pins they are associated to. If you need more help just ask. Thanks Rick.

Jul 28, 2011 | MSI : MS-7061-020 VIAKM400/A&V&L/SATA...

1 Answer

How to connect the wires to the panel P4M80M4 JPANEL1 wire list: 1) power led 2) speaker 3) power sw 4) reset sw 5) hdd led 6) usb 1 + g if you can send a diagram. if possible, in Russian....


The front pannel for the mother board veris with model no in all the mother board you will see the details printed in the in the motherboard as you said look in the motherboard for details named jp1 the detailed pin instructions will be given

Jul 03, 2011 | Computers & Internet

2 Answers

Just had to reatach my fan back over the processor but i took the mother board out and my wires came off the mother board which where for the power switch and the reset button, can anyone tell me which...


Hello Sir, hi, the wires on your casing are usually labeled, like in the picture below: cyberdyers_0.jpg

the power led green wire goes to the power led + and the white goes to the - . Now the HDD + goes to the HDD + the red wire, power switch can be interchange, same as the reset switch.

Dec 01, 2010 | Computers & Internet

1 Answer

How do i plug in power button in on mother board? Lost my manual so I can't find the model #. I was just switching my mother board and all other hardware to new case and my power button (or switch or...


> power led,

Runs to the LED (Light Emitting Diode) labelled "power" on the front of your computer-case

> H.D.D led,

Runs to the front-panel LED that lights-up whenever the Hard Disk Drive is being used.

> reset sw,

Runs to the "reset" button on the front panel.

> speaker

Runs to the internal speaker

> s/b sw

Very briefly touch a metal-tip screwdriver between these 2 pins.
If the computer powers-on, you've found the "power" connector.



Nov 06, 2009 | Intel Motherboard

1 Answer

Need picture of mother board for Emachine C2825


I've built a PC myself, each connector had text on it to say what it was and one arrow on it in relief, don't know wether that indicated plus or minus anymore.
Anyway, I recommend you just plug them in, and try to boot the PC. If it doesn't boot, switch the Power SW connector around, then it should boot. Do the same with the LED connectors, and it should work just fine!

Good luck,
Yannick.

Jul 13, 2009 | Intel D845GVSR Motherboard

1 Answer

Need to know where LED wires connect on Foxconn mother board.


Hi,
You can try going to the following site and download the user manual for the motherboard , which would give you the detailed diagram of which cables to connect where
http://www.foxconnchannel.com/support/downloads.aspx?ProductModel=661FX4MR-ES&TypeID=en-us0000001



Thanks
proton

Apr 08, 2009 | Foxconn 661FX4MR-ES Motherboard

1 Answer

ATX-SW Motherboard?


The manufacturer website should have what you need.
You also might need to know what chipset is on the board as well.
If it is the AMD board, go to www.amd.com
I hope this helps.
Good Luck.

Feb 26, 2009 | Computers & Internet

3 Answers

How to connect Power LED, Power SW, Power Reset and HDD LED


it is written in the motherboard..
re-reset botton
pw- power botton
hdd led- hard disk led
pw LED- power led

the code is pin 1....

Jan 28, 2009 | Zerus Intel Desktop Board D815EEA...

1 Answer

Motherboard


To download you're manual for the D815EEA2, please click the link below.
ftp://download.intel.com/support/motherboards/desktop/D815EEA2/EA2FV_English.pdf
You need to go to page 85.
7482c11.jpg Starting at Pin 1 (Hard drive LED) is positive + & pin 3 is ground -. Next, Power LED, Pin 2 is + & pin 4 is ground - .
Letter C, is for the reset switch, Pin 5 is + & pin 7 is - .
Power on/off switch, pin 6 is + & pin 8 is - .
The letter I is used for the internal speaker. The positive pin number 16 & ground pin number 10, letter G

Good Luck!
Have more questions? Please feel free to ask.
Mike

Jun 02, 2008 | Intel Desktop Board D815EEA2 Motherboard

Not finding what you are looking for?
Abit SG-71 Motherboard Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Abit Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

David
David

Level 3 Expert

778 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you an Abit Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...