Question about Shure Beta 52A Professional Microphone

1 Answer

Beta 52 not working, need wiring solution

My beta 52 is not working. I can hear sound when i plug it by rubbing the wires but nothing from the mic itself. Now I opened it up and found that 2 of the 3 wires from the 3 pin are not connected at all. Only the red one is connected. Anyone have any ideas what's wrong???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,137 Answers

I'm not positive that this is correct as the internal connection diagram isn't included in the manual but Blk= pin1, Blu= pin2, Red= pin3. Hope thats right. Shure gas lots of info on their website www.shure.com

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have just bought a Beta Zero and the wiring is incomplete so i need a wiring diagram to make a replacement from scratch.


Hi Clive_whitak, I am sorry you can't find the first and best tool you ever bought for your Beta but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
beta zero wiring diagram Google Search
http://www.lewisportusa.com/manuals.htm
http://www.betamotor.com/en/suhttp://www.lewisportusa.com/manuals.htmpport/manuals
Beta Zero 1990 Wiring Beta
Trial Model History Beta USA

Jul 06, 2011 | Beta RR 250 Motorcycles

1 Answer

Shure 58 when plug it has no sound


First i would check the cable. If cable seems good I would buy some contact cleaner and try cleaning the xlr pins on the bottom of the mic. Last i would take the set screw out of the side of the mic and carefully remove the xlr assembly. There are 2 wires connected to that and not a whole lot of slack so be careful. Basically make sure they are still soldered on.

Mar 27, 2010 | Shure Beta 58 Microphone

2 Answers

I have a 57abeta radio mic. Everything appears to


Hi,

Please check if the gain in the microphone is open.
Ther's a little hole where you can adjust the gain.

Good luck,
Gerard

Dec 20, 2009 | Shure (LX287CC) Professional Microphone

1 Answer

Beta 52 not working, need wiring solution


Normally the the black wire is connected to pin 1, the white wire is connected to pin 3 and the red is connected to pin 2. Sometimes the wires on pin 2 and 3 are reversed so try it both ways.

May 22, 2009 | Shure SM57-LC Professional Microphone

1 Answer

Recently I dropped my Beta 87A mic and the 2 wires that connect the mic itself came disconnected from the mic. I want to know how to resolder the mic.Thanks in advance. Norbert


I take it they are the wires to the diaphragm not the cable (XLR) connector.Be very carefull when soldering the wires back on. A small solder iron with a pointed tip works best. The positve terminal should be marked with a small red dot.The red wire goes there and the black on the negative. Be carefull and take your time.

Apr 27, 2009 | Shure Beta 87A Microphone Microphone

5 Answers

Shure beta 58


Benimur, you are correct, except that the Beta 58 is a condenser mic that required phantom power. In that case all 3 lines are used. Included below are the connections.

Dan

Sep 11, 2008 | Shure Beta 58A Professional Microphone

2 Answers

Shure Beta 58A wireless mic


Mmmm... The wires and the assembly is broken?
Sounds like you might have a trashed mic.
You can try to find a Shure dealer or a good music store to have them take a look at it.
I would suggest getting a new mic cartridge.
If you're interested in selling it, contact me.

Jun 10, 2008 | Shure Beta 58A Professional Microphone

2 Answers

No sound


on what unit are you connecting the mics. mixer or directly to amp or powered mixer?

Jun 22, 2007 | Shure Beta 87A Professional Microphone

Not finding what you are looking for?
Shure Beta 52A Professional Microphone Logo

Related Topics:

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shure Audio Players & Recorders Experts

Ben Armstrong

Level 2 Expert

334 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Shure Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...