Question about Televison & Video

2 Answers

Codes I would like the codes for the proper setting for the TV as listed below. My cable man was not able to reset the unit to properly work with one remote. I will be using a universal remote. (XBox 360) kljameson@tds.net or kathy@mmxmail.com 920-471-9892

Posted by on

  • 3 more comments 
  • katydid4593 Oct 19, 2007

    HD TV    SRS BBE   42" Flat Screen



    Sampo Model # PME-50X6 (L) 

  • katydid4593 Oct 22, 2007

    I have not yet had the opportunity to try the codes the wonderful person offered for me to try.  I definitely will add a comment when I have one.

  • katydid4593 Jan 03, 2008

    Thanks for the hints. I have tried codes and more codes but have not yet succeeded.

  • katydid4593 Jan 03, 2008

    Thanks for your help. BUT I will keep trying anything I can get my hands on.

  • Anonymous Nov 26, 2008

    chanell side works volume control does NOT respond

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found 004,009,046,172, and 175

Posted on Jan 05, 2009

Ad

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

The codes I found that Sampo uses are 506, 519, and 698.

I have a logitech harmony remote, and I use it with my xbox 360 as well. My remote had an automatic searching system for my TV. Where I just alternated between pressing the TV OFF button and another programming button until the tv turned off, that's when it acquired the code. Your remote might have a similar function. Just a hint.

Posted on Oct 19, 2007

  • Conor McBride Jan 03, 2008

    Sorry I couldn't help. I found out why none of the codes would work though...
    I found this in a review from pricegrabber.com



    Quote: "You can only use a "learning" programmable universal remote to operate the majority of the plasma TV functions. There is no functional Sampo TV code on the various universal remotes"

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

24 Sony, Need to get back on the proper setting. No remote cont.n 1-2--3 setting does not work


You should have its remote control to select its functions. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Oct 03, 2016 | Insignia NS-24 TV TV

1 Answer

Can you give me the codes to program my RCA remote to my Apex Tv


Codes to check with Apex brand TVs are: 0036 0037. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
If the above said codes do not work with your TV, refer these sites. You can get many codes for Apex TV, with different brand remote controls. Try them.

Oct 13, 2014 | VOXX INTERNATIONAL RCA RCU600M Universal...

1 Answer

My tv is blue, is locked, and the remote will not work to press the proper buttons to unlock the tv. What do I do?


Without remote control, you can't unlock it. To know more about how to unlock a TV, check the site linked here. Unlock procedure to many popular brand TVs are given.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Type in the brand name of your device in the search box, and press "Enter".
Universal remote controls are available at most of the electronic spare part selling shops.

Jul 28, 2014 | Apex Digital AT2708 27" TV

1 Answer

Daytek tv code


0195 0226 0720. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Mar 24, 2014 | Televison & Video

1 Answer

I have a Citizen flat screen TV model LT 2010. I just want to use my Jumbo Universal Remote Control but I dont have the codes. can you give me the codes for TV so that I can control my Flat...


here are some tv codes that you may find for your citizen tv model.the list are 002, 112, 319, 402, 407, 502, 512, 701, 805, 906. aside from those code click this universal remote control which have tv codes it might have compatible to your unit.make sure the remote control was properly set up so that the tv unit must recognized the codes. good luck i hope it will help you.

Jun 04, 2011 | Televison & Video

3 Answers

I have mediacom cable TV and they gave me a universal electronics Atlas OCAP 5-Device Remote Control It is preprogrammed for my set- top box. I can not turn my TV off and on or turn my volum up and down,...


Not all remote control devices use the same signalling method for Infrared communication. You may have to get a true universal remote like a Logitech Harmony which can not only output most signaling codes but can learn codes from your existing remotes. It also permits one to define tasks, such as "Watch DVD" using a relatively simple web interface. Once programmed, pressing Watch DVD will cause it to turn on the proper devices with the proper inputs selected.
Note that these programmable remotes can be expensive. I bought an older Harmony 550 for a lower price and it handles my satellite box, stereo system, TV, DVD and VCR with one-button selections.

Jan 02, 2010 | Insignia LCDTV26 26 in. Television

1 Answer

Need codes


Unit does not have a manual, but I did find this -

For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

  1. Find codes for each device and brand below.
  2. Press and "HOLD" CODE SEARCH.
  3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
  4. Enter the three digit code from the TV, VCR or Cable Box code lists.

  5. Release CODE SEARCH.
  6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
Let me know if this works, and if not, I'll keep looking.

Feb 01, 2009 | JVC DR-MV100B DVD Recorder/VCR

1 Answer

Remote control codes


RCA Universal Remote Control Programming Codes
The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:
  • TV-000
  • VCR-000
  • Cable Box-000
  • AUX is programmed with VCR code 037
Programming a Device using Code Search:


  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:
Find codes for device and brand below.
  1. Press and "HOLD" CODE SEARCH.
  2. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
  3. Enter the three digit code from the TV, VCR or Cable Box code lists.

  4. Release CODE SEARCH.
  5. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
RCA Codes for VCR
000,005,007,008,028
035,037,054,069

Nov 04, 2008 | RCA VR557 VHS VCR

3 Answers

RCA Universal Remote set to my Emerson TV


RCA Universal Remote Control Programming Codes Programming Your Universal Remote.

The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:
  • TV-000
  • VCR-000
  • Cable Box-000
  • AUX is programmed with VCR code 037
For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

  1. Manually turn ON your device (TV, VCR, Cable Box)
  2. Press and "HOLD" CODE SEARCH
  3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
  4. Release CODE SEARCH.
  5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
  6. Once the device turns off, press and release ENTER.
  7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

  1. Find codes for each device and brand below.
  2. Press and "HOLD" CODE SEARCH.
  3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
  4. Enter the three digit code from the TV, VCR or Cable Box code lists.

  5. Release CODE SEARCH.
  6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
Emerson CODES 011,026,027,028,029,030 031,032,037,042,053,064 065,067,075,076,079

Oct 12, 2008 | RCA 257003 Remote Control

3 Answers

Olevia 232t remote code


Go to Best Buy and buy the DirectTV Universal Remote Control Model RC64 ($20). It will control both the Satellite Receiver and the Olevia TV (Everything on the Olevia except the A-B-C-D Guide buttons). The Remote Control User Guide lists the control codes, four for the Olevia. The codes are:

Satellite Receiver: 00392

Olevia 235-T12: 11610 (last of the four codes listed for Olevia)

Enjoy!

Nick from Ft Myers

Dec 21, 2007 | Directed 434MHZ Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

659 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75843 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82149 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...