Question about Standard (CRT) Televisions

Open Question

32 sanyo tube tv

32 inch sanyo tube tv, no power at all


Posted by on

3 Suggested Answers

  • 85 Answers


the cpu of your tv is not working,coldsolder the mainboard of your tv and the cpu then get the voltage output of your tv.

Posted on Jun 13, 2008

  • 84 Answers

SOURCE: picture tube

no you have no vertical bad chip ic

Posted on Oct 21, 2008

  • 39 Answers

SOURCE: I have a Sanyo 32 inch tv, model # DS31650, that has no sound

there is an SIF coil (sound-intermediate-frequency) that goes bad on these units. it will be near the video jungle ic and marked sif on the board. since your sound is poor anyway you could try to adjust, in very small incremens at a time to see if audio picks up. sometimes dirty connections in the coil will cause poor conductivity, by turning this will move contact to new position mch

Posted on Mar 09, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Where is the reset button

Sanyo Service Menu -
Jump to Sanyo TV Service Menu Method 2 - Unplug the power cable. Press and hold the {VOL -} button on the TV while plugging the power cable back ...

Sanyo TV reset button location? ' Yahoo Answers
Jul 27, 2007 - Does anyone know where to find the reset button on a 32" Sanyo TV? The thing is just totally dead and I am thinking maybe if I push the reset it ... I have a Sanyo TV, I accidentally hit the reset button twice. I ...
Aug 6, 2012
36 inch sanyo tv won't change off video 2?
Apr 17, 2010
I accidentally hit the 'reset' button the remote of my sanyo tv ...
Jan 6, 2010
Sanyo DS32224 TV Problem!!?
May 21, 2009
More results from

Nov 29, 2015 | Sanyo DS31520 31" TV

1 Answer

My newstar remote do not activate with my sanyo led tv

One of these codes should work for Sanyo:
004, 013, 049, 108, 110, 180 or 209.

Apr 14, 2014 | Sanyo Standard (CRT) Televisions

1 Answer

My Sanyo TV was plugged in, I was watching it and all the sudden the screen went gray wash, then it cut off. You can plug it in the wall and it will try to cut on but cuts off after like 2 seconds. It also...

U have a soldering iron,solder?Now basic soldering?Unplug the tv wait about half an hour for the highvoltage to disapear.Take the tv aparts.Resolders the Video board that connected to ur CRT Tv tube.Resolders all those coldsolders pins sockets pins on the video board,will solved this problem.Have fixing these problems many times on the CRT Tube computer monitors,when it was still popular.

Sep 09, 2010 | Sanyo Standard (CRT) Televisions

2 Answers

Picture tube

no you have no vertical bad chip ic

Oct 21, 2008 | Sanyo DS27820 27" TV

1 Answer

Tube gets power. has sound, no picture

maybe the CRT socket hasa problem try to change it

Oct 15, 2008 | Sanyo HT32744 32" TV

1 Answer

32 INCH tv

the cpu of your tv is not working,coldsolder the mainboard of your tv and the cpu then get the voltage output of your tv.

May 27, 2008 | RCA 32F531T 32" TV

1 Answer

25 inch sanyo tv

If the horizontal lines going through the picture are fine white lines, then I would suspect the picture tube as having a heater to cathode short or some other problem. Since some sets have had a 3 year warranty on the picture tube, you may be lucky unless the labor to replace the tube is more than the set is worth. Sanyo is usually not a good name in consumer electronics anymore, so if you're looking for a replacement I would look elsewhere.

Mar 31, 2008 | JVC AV-32F704 32" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

951 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides