Question about Garmin StreetPilot 2620 GPS Receiver

1 Answer

Touch screen doesn't work and won't calibrate.

Posted by on

  • Anonymous Dec 16, 2007

    I have the same problem on two of these things. The exact same problem. It looks like a crappy product. I have 5 Garmins, two of these and both have the same problem.

  • Grayjay May 15, 2008

    The touch screen on my Garmin 2620 works but is out of calibration, that is, I cannot get the right-most letters to respond at all. There is a calibration protocol (Menu--Display--Find) but each time, after I touch the dots as instructed, it says "calibration failed." A factory tech says it might take half a dozen tries. I tried 20+ times to no avail. Only other option, I was told, is to send it in for repair "and that will be $275" !



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thanks for your instruction. I have a Garmin 2610 and have the same problem with you. I I got the same message like you using with pen but with my finger it worked!!!
Please try to use you thick finger!!!!

Posted on Jul 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

We have a VReader and the touch screen doesn't

Try calibrating the touch screen (means of doing this can be found in the user manual). If, after calibrating the screen the touch screen is no longer responsive, I'm afraid that the screen is "ka-put" and will require a repair or replacement.

Jun 24, 2013 | Cell Phones

1 Answer

The touch screen doesn't work with my finger tip, only when my nail touchs screen, also did the screen calibration, did not not help

It may be a resistive screen rather than a capacitive screen which is not as sesitive to touch. You may need to use a stylus as it may need slight pressure vs just touch if it is a resistive screen.

Apr 05, 2013 | Garmin zumo 550 GPS Receiver

1 Answer

Touch screen not working

The same thing happened to mine all you have to do is unplug you're car battery then plug it back up then it should work but first u have to calibrate before it works should calibrate very fast

Feb 15, 2013 | Soundstream VR-738NB 7-Inch Lcd...

1 Answer

How to calibrate the touch screen on my innotab

1. Take the batteries out of the toy and press and hold the power button for 1 minute. (Awkward silence on the phone for 1 minute.....). Then put batteries in and start it up again. Try the screen again. If that doesn't help: contact supplier.if my suggestion was helpful please rate it.

Jul 02, 2012 | Cell Phones

1 Answer

When i turn my 3ds on you can see all the top screen but not the bottom screen

Plug it into the charger first.try calibrating the touch screen.
you can get to the calibration menu without touching the touch screen. First, turn off your system. Hold down L+R+X. While holding these buttons down, press the power button. This should take you to the touch screen calibration menu. (See Nintendo 3DS Operation Manual, Page 15)
If it doesn't work,you need to replace the bottom screen.

please note that all games dont require the bottom screen

Jul 01, 2012 | Video Game Consoles & Games

1 Answer

I need to know how to clear and format to new out of the box it is a MC3090 motorola Symbol because it doesn't have enough memory and it doesn't save many codes thank you

1. Press and simultaneously hold the 1, 9 and Power keys. Do not hold down any other keys or buttons. As the mobile computer
initializes, the Symbol splash window appears for about a minute.

2. Calibrate the touch screen. See Calibration Screen to calibrate the mobile computer screen.

Hope this helps,


Sep 12, 2011 | Computers & Internet

1 Answer

My cell phone touch screen is not working...when i press one icon it lights up the one beside it and I have drained the battery and all of that....I don't know what else to do? I'm in contract and...

You can try re calibrating the screen if you can get the phone into settings. If your phone won't work at all you can send it into AT&T if you're still under warranty. I've had many phones replaced like that, as long as it doesn't have any water damage.

Sep 07, 2011 | Samsung SGH-A877 Impression Cell Phone

1 Answer

My LG GT350 touch screen will not work properly. If I touch an icon, another icon loads or doesn't load at all

It might be a screen calibration problem, i am not familiar with that phone but i would call where you bought it, or call the manufacturers customer service phone line, find out if there is a way to calibrate it manually, if not try a hard reset they can also tell you how to do this and how to back up your data . if this does not help or work it might be a defective device and you should trade it in for a new one.

May 05, 2011 | LG GT350 Cell Phone

1 Answer

Touch screen doesn't respond sometimes

- calibration your phone
- if doesn.t work ,... change the touch screen

Apr 28, 2010 | Nokia 5800 XpressMusic Smartphone

Not finding what you are looking for?
Garmin StreetPilot 2620 GPS Receiver Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Experts


Level 3 Expert

2130 Answers


Level 3 Expert

77932 Answers

TO Lady

Level 3 Expert

638 Answers

Are you a Garmin GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides