Question about Maxi-Cosi Baby Gear
My son is almost 3 years old. Facing forward position. Already on the farthest out position, but seems very tight. Help!
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would always suggest that you take this back to the retailer to have the part professionally repaired, or contact www.maxi-cosi.com who will be able to advise you.
I hope this helps.
Posted on Sep 15, 2009
SOURCE: Maxi Cosi Tobi straps locked
hi i had the same problem so i took it back to toys r us where i got it from, they rang manufacture and were advised that they r going to recall them as it is a fault. hope this helps
Posted on Sep 19, 2009
Tips for a great answer:
Jan 03, 2014 | Maxi-Cosi Baby Gear
Aug 15, 2013 | Britax Vigour 3+ Carriage Stroller - Mars...
Apr 11, 2013 | Maxi-Cosi Elea in Intense Red
Aug 04, 2011 | Graco Baby Gear
Just did it. It took two of us, but only a couple of minutes and no
tools (except a table knife) once we'd worked out what the problem was. The
reason the strap doesn't thread easily through the slot is that there is a sprung
two-part mechanism that needs to be held open. One person threads the strap through
while the other keeps the mechanism open.
1) Find the slot under the
chair that the strap goes into - turn the seat upside down; it's a thin gap you
can feel with your fingertip when you run your finger along the narrow back of
the metal strip under the front of the seat (not the base).
2) Remove the metal rod
that attaches the grey reclining lever. The rod is about 20 cm long and can be pushed
out without tools. Removing this rod seems to make it easier to open the buckle
mechanism. When replacing the rod later, you just have to line it up carefully with
holes (we used a torch to help us see them)
Make sure the strap passes under the metal rod at the bottom of the seat
back (you can see how here in a small photo here: http://www.englishforum.ch/attachments/sale-wanted/37565d1327058634-sale-maxi-cosi-tobi-car-seat-9mths-3-yrs-zh-maxi_cosi_tobu_small.jpg)
4) Push back buckle as
far as it will go (it goes back past vertical easily, then needs another firmer
Hold the buckle in this backwards position.
Insert a table knife (rounded and blunt, not sharp) into the space under
the buckle and push back the sprung, hinged plastic part that the knife touches
at the back.
Person 1 then threads the strap back through the slot, pushing until then
end comes out.
Tie a knot in the end of the strap so you don't accidentally pull it
Replace the metal rod in the reclining mechanism.
Mar 21, 2011 | Maxi-Cosi Maxi Cosi Tobi MAGIC ROSE 2008...
Dec 04, 2010 | Cameras
Oct 01, 2010 | Chevrolet Malibu Cars & Trucks
Jan 13, 2010 | Eddie Bauer 3-In-1 with Latch
Jun 21, 2016 | Maxi-Cosi Familyfix Base Isofix only
163 people viewed this question
Usually answered in minutes!