Question about Ricoh Aficio 1045 Black and White Copier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Please browse the link below;
Good luck and please rate me, thanks.
Posted on Jan 29, 2009
SOURCE: Ricoh Aficio 2018D
This could be a very bad code its "main motor lock", either you have too much load on the drive unit ( paper stuck, locked up pcu or fuser ) and maybe bad BICU board.
-Carl, please let me know if this helps.
Posted on Jun 27, 2009
Transfer belt mark detection error
• The main motor is operating; and
the lock signal is detected. → The
belt mark sensor signal does not
change for 120 milliseconds.
• Defective main motor
• Image transfer belt out of position
• Belt mark blurred or absent
I would remove the pcu unit (3 screws)and check the transfer assy belt mark and clean the sensor that reads the belt mark. Worst case senerio is replaceing the entire pcu unit.
Posted on Mar 07, 2010
Tips for a great answer:
Nov 14, 2011 | Office Equipment & Supplies
Nov 25, 2009 | Ricoh Aficio 1035 Copier
Sep 25, 2009 | Ricoh Aficio CL3500N Laser Printer
Sep 14, 2009 | Office Equipment & Supplies
Mar 27, 2009 | Ricoh Aficio 450 Copier
Jan 22, 2009 | Ricoh Aficio SP-C210SF Printer
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: