Can u help me...

i think you must searching "kontol" at google

still shows ink level low

press the Stop/Reset button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.Canon do not like you to use refills and generic carts so the function for detecting the remaining ink level will be disabled

I'm assuming that you are using aftermarket or refilled cartridges. Have you tried using OEM cartridges to clear the problem? After you insert the OEM cartridges, run deep cleaning at least twice and then the alignment utility. This should clear the problem.
Let me know if this solves the problem. If you continue to use aftermarket cartridges, try those from LD Products online.
Please make sure to rate this solution. Thanks.

Use the correct ink cartridge referring to the model number indicated on the printer box or the instruction manuals. Please refer to below website: http://support-sg.canon-asia.com/contents/SG/EN/8000660401.html

Your printer uses the following cartridges:

canon-pg-30
Black Pigmented
canon-cl-31
Color
canon-pg-40
Black Pigmented
canon-pg-50
Black Pigmented canon-cl-41
Color
canon-cl-51
Color


ou find the refill instructions for your cartridges in the book at the link below:

Download Inkjet Refill Instructions

You can also buy refill kit here: inkjet refill products.


You also need to reset the cartridge after refill, see: Reset Ink levels for canon mx310 - FixYa

How to reset Canon MX310 printer low ink signal

1. Power off the printer.

2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.

3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.

4. Release power button (the screen should now say 'Service Mode').

5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.

6. Press the power button once, (the orange light should go off).

7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.

8. Press the power button, and wait until printer has shut down.

9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.

10. The page counter is now reset! Enjoy.

Canon cartridges have an intelligent chipset to prevent them from being refilled. To have them working properly you need to reset the chipset.
Try the software on this link.
If the above did not work you will need to use a cartridge chip resetter if you want to refill your cartridge.

I've heard that with canon there is a way around the ink-level chip monitoring on the cartridge by doing the following:

1. Power off printer
2. Hold RESUME button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. Release POWER button
6. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
7. Press POWER to set data