Question about Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television

3 Answers

Panasonic PT50LC14 Power issue

I turn on the tv and the light blinks green for 2-3 minutes with no sound or picture. DOes that mean that the lamp is burnt out? I never got a warning or anything about the lamp before. Help.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

We have a PT-50LC14. We replaced the lamp 6 months ago with a TY-LA1000 bulb we bought from a company online (not directly from Panasonic) and it worked for 6 months. Then the TV started turning off on it's own...sometimes it would not come back on for an hour or so. We called the lamp company and we luckily had 1 day left on our 6 month warranty!! They sent us a replacement bulb and the TV would never power on. It would try to power up, but the bulb would never ignite. The power light would flash and then the lamp light would flash every 5 seconds. I had a friend that has the same type of TV and she ordered her bulb directly from Panasonic. I borrowed her lamp and it powered right up. We then called the online company and they sent us yet another replacement bulb, and I tried it today and it works. It seems like these TVs are very particular about the type of bulb used. Next time, we will be ordering ours directly from Panasonic and just paying the extra $100. We have been without our big screen for 2 very long months! I had called a local tv repair shop, called Panasonic directly, and read through countless internet forums, and I thought we were going to have to replace the ballast or get a ballast repair kit and start messing with the circuit board.

Posted on Sep 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When my panny is cold i have to turn it on and off and then on again before the picture shows up

Posted on Oct 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

Needs a lamp,light doesny always come on

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lamp or Power issue Panasonic PT56lcz70


I would think that the fact that when you held the power button in for a long time that would give you a hint! If the power button is making a poor contact there will be a small surge of power and some parts of the internal circuits will respond(indicator lights, for example). Try REPLACING THE ON/OFF BUTTON.

Jan 22, 2013 | Panasonic PT-56LCZ70 56" HDTV

1 Answer

Replaced lamp but lamp light still blinks orange


I have a wd-57731 The lamp light blinked orange. i replaced the lamp turned the tv on and the timer blinks green for one minute and then the lamp light blinks orange again. It won't turn on. Can you suggest anything?

Nov 22, 2011 | Mitsubishi WD-57731 57" Projection HDTV

1 Answer

My Misubishi WD-52631 DLP TV is off sudenly. I turn it on again, but no picture, no sound, nothing happened. I reset it, nothing happends. the green power light blinks for a while, then shut off itself....


Tv LED "LAMP" light indication is blinking?And ur tv projection lamp inside ur tv been used like 1 1/2 or 2 years.Yes.The tv projection lamp require changing,tv projection lamp life are ended.

Apr 19, 2011 | Mitsubishi WD-52631 52" Projection HDTV

1 Answer

My Sony KDS-60A2000 is 41/2 years old. About 2 weeks ago I could not get the tv to power up. the green stand by light just kept blinking. I powered off, then powered up again and the tv started and and...


Hi,
TV needs lamp replacement as existing lamp got weak or has been reached to end of its working life, please note that lamp is not dead or broken so that is why lamp lit is not lit at tv front.
Hope these info will help you.
Thanks.

Nov 03, 2010 | Sony KDS-60A2000 60" HDTV

1 Answer

Hello, We have the Panasonic project TV (PT-50LC14). We purchased a new bulb this past July. We're now experiencing problems with the TV. After turning it on for less than 5 minutes, the TV shuts off. ...


Hello well this kind of problem all the time is because you have a fan problem and you could have dirt inside of your tv and sounds also like a ballast problem i have this issue also and I got connected on the live chat that a web say has that they call discount-merchant they sell parts and lamps for TV they could help you they help me twice.
Regards

Jan 01, 2010 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

TV tries to power up but can't


bad lamp, yes it will not have no sound, 

Jun 08, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Panasonic PT50LC14 No Sound or Picture


unplug it, and let it set for a minute or 2, then try it again...if it does it again hit the power button again to turn it back on...also once the the tv turns on make sure you reset the counter for the bulb..that will also cause problems...to reset the counter press the (-) volume on the tv while holding down the (-) press spilt,pip on the reomte...the lamp will reset and the indicator will go out

Jan 20, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

The tv wont turn on


hello 2 blinks on this tv means you have this issue below
PT-44LCX65
2 blinks 5 secs you have your lamp cover open

check for this

hope this helps

Dec 14, 2008 | Panasonic PT-44LCX65 Television

6 Answers

Panasonic PT 50LC14 problem


You have to close the lamp door. It has a switch in it much like a clothes dryer door in that when it is open it wont operate.

Feb 23, 2008 | Panasonic PT-50LC14 50" Rear Projection...

Not finding what you are looking for?
Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television Logo

639 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...