Question about Kitchen Appliances - Others

Open Question

Oster manuals I need the repair manual and schematics diagram. The machine keeps popping a curcuit breaker when I plug it in.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 204 Answers

SOURCE: oster breadmaker

I had great success in finding what I wanted for my breadmaker at http://breadmakerpartsemporium.ioffer.com/. They have manuals and parts for most breadmakers at very reasonable prices.

Posted on Jan 11, 2009

greenspan
  • 1734 Answers

SOURCE: During neading machine makes squeaking noise, sounds like bearing

Look here, they have the manual for download.

Posted on Apr 09, 2009

taran_2005
  • 10515 Answers

SOURCE: I need a manual for Oster Bread Machine Model

Hi,

Download the manual from :-

http://www.oster.com/manuals/oster/005838-000-000_English.pdf

You need to have Acrobat Reader to View this.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Jan 07, 2010

  • 1 Answer

SOURCE: oster bread machine 5811 manual

You may download, save and print the .PDF manual free of charge from:

http://dl.owneriq.net/d/d16a815a-a3e6-4ded-952e-d8d35a3638cb.pdf

This .PDF document does not specify it as the Model 5811 manual; however, it is nearly identical, right down to the control panel on top.

Before I posted this comment, I downloaded, saved and printed the .PDF manual, and then took it downstairs to give it a whirl. PERFECT! At the time of this writing, my elderly Oster Bread Machine, Model 5811, #BM-100 (J222) is whipping up my first large loaf of white bread!

Incidentally, we discovered our Oster Bread Machine sitting on a shelf in an old house we were given as an apartment community manager quarters. It was sitting with some other stuff slated to be hauled to Goodwill (or the dump)!

I spent the past hour surfing the net looking for an Oster Bread Machine Model 5811 manual. Other than a couple of site where I was asked to pay a fee to download a .PDF or .ZIP file, there was little else. A couple of sites that purported to be THE place to download the manual turned out to be non-existent or otherwise dead ends.

Hope this helps all you who have been seeking this manual in vain for so long.

Happy Baking!

Posted on Jan 12, 2010

  • 94 Answers

SOURCE: I just purchased an oster bread machine there is

Try here http://www.manualsonline.com/ they have manuals for just about everything.

Posted on Jan 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need an owners manual for my oster prima latte machine


http://www.oster.ca/Manuals/MANUALS/BVSTEM6601-033_43_31928564.PDF

May 13, 2014 | Oster Microwave Ovens

1 Answer

Oster bread machine manual


Hi and welcome to FixYa, I am Kelly.
You did not mention a model number so I guessed. Here is the manual for the 2 LB machine:
http://www.oster.com/manuals/oster/005838-000-000_English.pdf (58 minute machine)

This is for the other machine:
http://www.oster.com/manuals/MANUALS/CKSTBRTW20_43_33506787.PDF

All Oster manuals are on this page:

http://www.oster.com/ProductManuals.aspx

Thanks for choosing FixYa,
Kelly

Nov 15, 2010 | Microwave Ovens

2 Answers

93 s-10 blazer keeps blowing ECMB fuse which also runs the fuel pump. cant find a schematic!


The ECM tells the fuel pump to come on. You can get a circuit breaker from most parts stores, and many stores you can get a repair manual for $20 that will have a schematic in it.

Jul 12, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

Need a schematic diagram for a kitchen blender


I think this will help a bit (p.2 only), although it seems a little crude to be a full service manual - this is a service manual for an Oster "Osterizer" Blender - one of the classics:
http://www.villaware.com/manuals/ProductService/Service/Sunbeam/4112.8.pdf

Here is one for a Philips blender, but once again, not as detailed as I've ever seen:
http://www.eserviceinfo.com/download.php?fileid=27616

These are the free one I could find. Generally, an authorized servicer is not allowed to distribute a full service manual, so you normally have to pay someone to get a complete service manual.

-Tha Mp3 Doctor

Mar 31, 2009 | Philips Blenders

1 Answer

One of 2 circut resets keeps tripping on our Generac generator


If it's tripping a breaker that usually means there is to high of an amp draw on that curcuit.

Are you plugging more things into that particular curciut (or just different but higher amp draw items) than you did last year?

It's also possible that one of the items plugged into that curcuit is wearing out and drawing more amps than before.

If you have an amp meter, plug everything back up just the way it was when you were having problems. Check the main wire going to that curcuit. (right at the breaker)

If your amp draw is greater or nearly the same as the amprating of that particular circuit, then thats your problem.
To many things/to high amp draw on one circuit.

If it is not near the amp rating, and you are getting proper voltage to the breaker, then I would replace that breaker.

Dec 30, 2008 | Electrical Supplies

1 Answer

Thermal Arc Welder 150 GTSW went ''pop''


You badly need a service manual, you might be able to get one at the Thermal Arc home page.
Since it blew the input power breaker and let off a bit of smoke we'll take as given that something in there shorted. Inverter welders like this have a rectifier section, then an inverter section, then another rectifier section before the torch. I'd bet a little money that what went pop was one or more of the SCRs in the rectifier section. You really need the manual to do anything useful to this machine, pay particular attention to the repair sections where they talk about cold checks before powering the machine on again, it'll save you hours of replacing parts.

Please rate my answer,
Carl

Nov 15, 2008 | Welding Tools

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...