Question about Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

1 Answer

Frigidaire FDB1050REM2 Stainless steel

Wash cycle seems to take forever -- about 2.5 hours, not including dry. Does anyone else have this problem? The dishwasher was installed when my house was built 18 months ago. I noticed the long cycle time then, and called for warranty service...they said that's how long this model takes.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

They weren't lyin', with the new improved energy effeciency and cleaning units they using more "soaking" times to losen food particles to use less water and clean better. And that they deffinitly do versus old units and they save more energy by doing this also. On some makes and models theywill have cycles that still use less time but also will then use some more water during this cycle. My SEARS store "blue crew" did research and found out this cycle for me.

Posted on May 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FILLS, DOES NOT WASH, THEN DRIES


GE GLDT690TBB Fully Integrated Dishwasher with 7 Wash Cycles Including SaniWash and SpeedWash, Nylon Racks, Stainless Steel Interior, Countdown Display and QuietPower 56 Quiet PackaBlack- Recent Questions, Troubleshooting & Support

Oct 07, 2015 | GE GLDT690TWW Fully Integrated Dishwasher...

1 Answer

My frigidaire wont spin or wash


Remove the 2 screws on the top panel and remove the panel. Check the wiring connections on the control board.

Nov 11, 2012 | Frigidaire GLTF2940FE Front Load Washer,...

1 Answer

The dishwasher would wash and wash and wash. It will not go on to the next cycle. If you put it on the rinse cycle, it still rinses and does not stop. We had a tech in. He changed the entire control...


Check the mechanism that activates the washer when the door is closed, the issue may be that the cycles are being interrupted. This dishwasher is notorious for having issues, so it may be better to get a new one if the issue persist.

Mar 02, 2011 | Frigidaire 24 in. FDB1050REC Stainless...

2 Answers

I have purchased a house with the single door dishwasher and it takes forever to wash - about two hours - what could be the problem?


Check your program settings. If wash quality is good, it's OK. Check your inlet water has sufficient pressure! Refer user manual

Apr 07, 2010 | Fisher and Paykel DS603SS Stainless Steel...

1 Answer

When I set it to normal wash it takes more than a hour to finish I also press all the other settings dry heat, sanatizer. dont know if I'm doing something wrong


Every setting extends the wash time. You only need sanatizer if your doing a lot of baby bottles. The normal cycle with the strong dishwasher detergent will kill all bacteria anyway. The dry heat extends the time even longer and uses more hydro. Just open the door when the cycle is finished and they will dry on there own.
I hope this is of some help.

Dec 31, 2009 | Frigidaire 24 in. FDB1050REC Stainless...

2 Answers

No water on wash cycle. replaced water vavle but still sishwater is dry.


There is a possibility that the water pump is bad or is clogged. How old is your unit? If it is still under warranty, see about getting a service person over to look at it. If it isn't under warranty consult your user's manual about getting to the waterpump to see if it is clogged or even working.

Aug 12, 2009 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

Frigidaire fdb1050rem2 dishwasher will not drain during was cycle


Checked water temperature at water heater. It was at 110 degrees. Turned water heater up to 125 degrees. Dishwasher works perfectly now.

Mar 30, 2009 | Frigidaire 24 in. FDB1050REC Stainless...

1 Answer

NEW DISHWASHER REPEATS THE WASH CYCLE FOR OVER AN HOUR 7 HALF


Dear Customer

please perform the follownig checks

please rate this,thank u.

Dec 16, 2008 | Frigidaire 24 in. FDB1050REC Stainless...

Not finding what you are looking for?

Open Questions:

See all Frigidaire 24 in. FDB1050REC Stainless Steel Questions

Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher Logo

740 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4340 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...