Question about Dyson DC07 Bagless Upright Cyclonic Vacuum
Posted by Anonymous on
Hello, this is Ava with Think Crucial.
There are a number of reasons why your brush roller has stopped moving. General maintenance to your vacuum is crucial and will help it work at peak performance.
First things first lets focus on the brush roller. Unplug the vacuum and turn it on its side. Look for any noticeable clumps of debris or hair strands that may be caught in the brush roller. Remove these obstructions, probably best to do so with a scissor if it's hair or long pieces of carpet fibers. After removing the debris try manually rotating the brush roller to uncover other hidden clogs. Another thing to take note of is the condition of the bristles on the roll itself. Are they loose or worn down? These are signs that your brush roller is in need of replacing.
While checking out your brush roll you might as well take a look at your vacuums belt. Your belt should be replaced about every three months. After regular usage, the belt will stretch out, lessening the tension on the brush roller. Lesser tension diminishes the brush roller's turn rate and speed. If the belt feels loose then it certainly is affecting your vacuums suction as well as your brush roll not moving at all.
You can purchase a wide variety of high quality Dyson replacement parts for your Dyson Vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
I hope this was helpful.
Think Crucial Customer Care
Posted on Feb 19, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With the DC14 in its upright position, and looking from the back, there is an access hatch just to the right and bottom of the dust canister. Remove this and check for any obstruction. With the hatch still removed, tilt the handle back (as if vacuuming a floor), and you should spot that the mechanism in to which the access hatch fits changes over from one hole to another. This is how suction is transfreered from the telescopic arm to the brush bar when the unit is taken out of the upright position.
With the handle tilted back, the hole you can see is one end of a flexible pipe that leads to the brush bar. Check for any blockage and/or foriegn objects. If there is no obvious problem, you'll need to check the other end of the pipe. You can do this by removing the toe plate on the bottom of the brush bar area. The plate is held by 3 or 4 half turn fasterners - a 5 pence piece is ideal for undoing these.
If still no joy, the only other thing it might be is that the brush bar isnt spinning - this isnt actually lack of suction, but without brush rotation any upright hoover is far less effieicnt at picking up bits from the floor. Brushes not spinning on a DC14 is quiet a difficult thing to fix on a DC14 as there are two separate rubber belts, one of which is hidden under a plastic cover. There is also a clutch mechanism between the belts that can cause problems some times.
Posted on Oct 09, 2009
There sould be a rubber flap under the pipe.Pull it down to remove dust and **** that gets stuck.
Posted on Dec 27, 2009
Testimonial: "He was very helpful in his suggestions and after the first suggestion didn't work out he provided another. Thanks for the help."
My Dyson dc18 had the same symptoms. The wand worked well and the floor bar had no suction. After removing pieces & shoving my fingers into the machine (no blockage) I found the suction pipe rotates between two positions (floor and wand). It looks like a piece of plastic broke on the outside housing, so it no longer rotates positions when the wheels are raised or lowered. My son found we can move the suction by sliding a finger into the mechanism behind the wheel cover, and rotating the plastic piece clock-wise or counter clock-wise until it locks into position. It's a big pain but it works for now. I wish I could find a replacement piece online. Patty
Posted on May 23, 2010
I realize this questioned was posted >1 year ago, but in the event you still have the poor suction/wheezing or if anyone else has this issue, here's what worked for us.
Use a plumbers sink snake to unclog the "pipe". I thought it was the pipe on the right hand side (when you're looking at it) which needed to be unplugged. There was a little in that size, however we retrieved the nastiest "hairball" out of the left hand side (when you're looking at it) and after removing that, and re-testing, the suction was incredible. In addition, the "wheezing" noise was no longer there.
Posted on Jan 28, 2011
Tips for a great answer:
Feb 12, 2015 | Dyson Slim DC18 All Floors HEPA Bagless...
Dec 20, 2014 | Dyson DC18 all floors Bagless Upright...
Jan 18, 2014 | Dyson DC18 all floors Bagless Upright...
May 09, 2012 | Dyson DC18 all floors Bagless Upright...
Feb 14, 2012 | Dyson Slim DC18 All Floors HEPA Bagless...
Mar 14, 2011 | Dyson DC18 all floors Bagless Upright...
Nov 13, 2010 | Dyson DC18 Allergy Bagless Upright Vacuum
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: