Question about Audio Players & Recorders

Open Question

How to wire rca integrated stereo amplifier sa-155, to old tv

How do i wire rca integrated amplifier to stereo, or to old tv speaker.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jfpogie
  • 104 Answers

SOURCE: TEAC A-h500 integrated stereo amplifier

you have a defective power output, you have to replace it.

Posted on Jan 21, 2008

marsrover
  • 682 Answers

SOURCE: hook up pioneer stereo amplifier model SA-1270

for audio system always you have left and right channels.
get the output (left&right) from tuner---go to equalizer input left&right.---from equalizer output go to amplifier inputs.and certainly from amplifier output to speaker.

Posted on Mar 11, 2008

robotek
  • 1512 Answers

SOURCE: JVC AX-33 Stereo Integrated Amplifier - very little sound!

Hi xaser

Check that someone has not turned on the tape monitor or mute. Both of these may cause the problem. Is there alot of noise with the sound you are getting when you turn it up?

regards
Graeme

Posted on Mar 22, 2008

robotek
  • 1512 Answers

SOURCE: Vintage Stereo Connection ???

Hi spanky

Where to start :) I am excited thinking about them :p You got 2 totally cool pieces of classic vintage gear there in the C2 and the Marantz. I have a C2 preamp myself (gathering dust but wont sell it cos its excellent) and the marantz would be totally cool to have(but then I am a little biased towards 70's vintage marantz). They ruled the roost in HiFi amps throughout that decade.

Because they are both integrated amps, you could use them as standalone systems with a pair of speakers, and just plug your favourite gear into them. If you just wanted to run up a nice sounding HiFi, I would sell the kenwood gear and just keep the Marantz. The Kenwood kr1100 has the edge in power, so if it is grunt you are looking for use that. Because vintage sound is all about stereo, you only really need an integrated amp to get great results.

the specs are
# Kenwood Model Eleven G (KR-11000G) Receiver
120W per channel min RMS, both channels driven, at 8 ohms from 20 to 20.000 Hz with no more than 0.03% total harmonic distortion.
Dynamic power output 440W at 4 ohms
Power bandwidth 5 Hz to 70.000 HZ
Frequency response 5 Hz to 100.000 HZ -1.5dB
Signal to noise ratio 115dB

The marantz is a little lower in power at 75rms a channel, but will have the sonic edge in vintage sound over the kr1100. Look them up on ebay and you will find that they do have some value to collectors and people seeking nice tone. There is an 1152 for sale here for AU$900

Best bet is to fire up the 2 integrated amps,and see how they are going. Run them for several hours to be sure there is no strange noises and crackles. Then decide if you want power or finesse.

You could also run both amps from the C2 preamp by connecting to the Amp in connections to the rear of the integrated amps.

happy to talk to you more about it, hit me with a Fixya if my advice was helpful to you. I would keep the marantz, use that and sell the rest and buy some nice speakers:)

regards
robotek

Posted on Jul 21, 2008

  • 4234 Answers

SOURCE: Manuals For Technics

The manuals for these are on paper not electronic files. Is there are particular problem you are trying to solve?

Dan

Posted on Jan 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No volume on all left side speakers


Determining the Cause of the Problem Let's assume our system has a head unit, a crossover, a two channel amplifier and two door speakers with only the right speaker working (the left speaker is not working). If the door speakers are behind the door panels then we want to make sure the speaker is the problem before removing the panel. We'll work backwards starting with the amplifier and ending at the head unit. Testing for a Speaker Problem With the vehicle and the stereo turned off disconnect the speaker wires for both the left and right speakers at the amplifier. Now connect the left speaker to the right amplifier output (which we know works). Turn on the stereo system and make sure the balance is set to the middle position.If the speaker still doesn't work then the problem is somewhere between the amplifier and the speaker Testing for an Amplifier Problem Now we'll need to see if the amplifier channel is bad. Put the left speaker back on the left amplifier channel and the right speaker on the right amplifier channel. This returns the speaker wiring to its original configuration. Again, with the vehicle and stereo off unplug the RCA cables from the amplifier's input and switch them so the left cable is in the right input and vice versa. Turn on the stereo system. Testing for an RCA Cable Problem For any intermediate components between the amplifier and the head unit follow these steps for each one. We only have a crossover so we'll just do this once. Begin by testing the RCA cables between the intermediate component and the amplifier. Unplug both RCA cables from the intermediate component's output. Now plug the working channel's RCA cable into the non-working side of the crossover. In our case the working channel is the right so plug the right RCA cable from the amplifier into the left side of the crossover. Turn on the stereo system.
If the right channel continues to work then you know the problem is in the RCA cables between the amp and the crossover. esting for a Crossover or Equalizer Problem At the input of the intermediate component (in our case the crossover) flip the RCA cables around (left to right input and vice versa). Turn on the stereo system.
If the right channel continues to work and the left channel continues to not work then you know the problem is in the intermediate component. Replace or repair this component.
If the problem is now in the right speaker and the left speaker works then the problem lies before the crossover. Turn off the stereo system and return the RCA cables to their normal places.
Testing for a Head Unit or RCA Cable Problem Pull out the head unit from the dash so you can access the RCA cables. Unplug both RCA cables from the head unit. Do not disconnect any other wiring. Plug the right RCA cable into the left channel of the head unit. Turn on the stereo system.

Sep 29, 2016 | Cars & Trucks

2 Answers

Hook up sound to a sony ps-lx340


try a RADIO SHACK SA-155 MINI AMP at Radio Shack. I believe around $30.00. Use the amp many times.

Nov 28, 2014 | Sony Ps-lx320 / Ps-lx340 Stereo Turntable...

1 Answer

How to connect speakers to RCA model #RP-8070D


This unit is just a 5 disc CD player and cannot drive large speakers all by itself. Normally it is hooked up to a stereo receiver / amplifier which is what provides the power to drive the speakers which are wired to the back of the stereo amplifier.

If you have a home stereo, then just run the cables from the 2 AUDIO OUT connectors on the back of your CD player to the CD IN connectors on the back of your stereo.

Then turn your stereo on and select CD on your stereo input mode selector and you should be able to play the cds on your RCA and hear them through the stereo speakers.

If you do not have a stereo amplifier with speakers to connect it to, then you can always listen to it through headphones connected to the headphone jack.

Or if you have a set of self powered amplified speakers, like the kind you hook up to a computer, then you can run the AUDIO OUT cable from your cd player into those as well.

Good luck.

Apr 14, 2011 | RCA Audio Players & Recorders

1 Answer

Can't find an rca audio out on my hitachi hitachi cmp4121hdu. Is there one? or is it just the wired speaker inputs?


Hi I hope this answers your questions today. Your tv does not offer rca audio out, and the built in speakers are the only available that way.

That being said, I suppose you could disconnect the wires from the speakers and feed them out the edge of the cabinet, you would judt have to cut out a spot big enough for the wires to come out.

The TV has an 8 watt stereo amplifier, so I guess as long as you don't expect to be blasting the windows out, you could attach them to external speakers, or even an amplifier, if it allows speaker in, some do.

If you do hook it up to external speakers, just remember that the TV doesn't have a high-watt amplifier, though I suppose you could get an adapter. Speaker levels input and line-level outputs. This would provide you with the rca jacks that you are seeking.

Jan 28, 2011 | Hitachi CMP4121HDU 42 in. Plasma...

1 Answer

How can I hook up subs to this stereo


If this is a FACTORY radio you need to buy an adapter for the stereo, This is an example.

RCA OUTLET plugs are connected to the amp.

This is an example. you have to get the one for your vehicle, You can also check the dealer. They might have one.

Metra radio wiring harness for VW/AUDI BOSE INTEGRATION 96-UP. FEATURES :Amplified & Boss SystemUses the Power Wire of the 70-1784; Front Speaker Output Only on Some Models20-Way Connector (Plugs into Mulit-Colored Harness in Car) with RCA Plugs

Jan 11, 2011 | Car Audio & Video

1 Answer

I have a 50"tv , It has stereo audio out (L/R


If the labels say Audio Out with RCA jacks, then you don't connect speakers to those. You must connect those to a audio amplifier ( home stereo system )

If you have speaker clip jacks like on the rear of a stereo system, then just connect them as you would any other.

Nov 24, 2010 | Sanyo DP50747 50 in. Plasma TV

1 Answer

Connecting a car stereo to an amplifier


you have to connect your 4 speakers to 4 speakers output direct to your car stereo no need of amplifier to 4 speaker but speakers should be small not like a woofer, and you have to connect your sub woofer by using amplifier don't connect direct. connect the output of your car stereo (using 2 RCA) to the 2 RCA inputs of amplifier. If u connect your 4 speakers to your amplifier then your car stereo does not support Left Right channel.
You can also connect your laptop or iPod direct to your amplifier.
Good Luck
enjoy music

Nov 24, 2009 | Kenwood Car Audio & Video

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...