Question about Kenmore 25842 Top Load Washer

1 Answer

Washer will not do anything

We have a kenmore 80 series heavy duty washer top load and it will not do anything. I thought it might have been the electrical outlet but plugged it into another location where anything that is plugged into it works fine, not sure what to do next. please help, thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 214 Answers

Sound like you need a new lid switch..if not cheak the wire harness on the motor may be lose.if you need more info on it let me know hope i fixya :)

Posted on May 22, 2009

  • panamagurl Nov 24, 2011

    I checked all that the dryer works great but no juice for the washer please help!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have kenmore 80 series heavy duty/ super capacity plus washer that after it fills with water,hot or cold and it starts the wash cycle, I noticed that the agitator only moves once in awhile and stops


hum either a bad timer sticking the point contacts close. have u tried this in all cycles? and possibly a motor with bad windings not enough power to run agitation? try running in mild or gentle and see what happens? I was tempted to say the cam dogs in agitator but they dont work then stop then work, when they go out they go out.

Feb 17, 2015 | Kenmore Washing Machines

3 Answers

How many cubic feet are in the Kenmore Washer Model 110 80 series


The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches.

Oct 26, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore washers, heavy duty 80 series, no spin


Hello, Your problem is going to be with your lid switch, this is located normally either in the control panel or about half way down on the right side under the lid. This is a safety feature to stop you opening the lid while the machine is in a high spin. Once you have located the switch trace the wires back to the wire harness in the control panel. Disconnect the lid switch from the wire harness and with an ohms meter check for condinuity on pin 1 & 3 (the 2 outside pins not the middle this is a ground) You should find you have no condinuity and should replace this switch. If you have any other questions or concerns please feel free to comment again. Good Luck!! Mike

Oct 14, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

What is the capacity of my Kenmore 80 series Model 110 washer?


The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches

Sep 08, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

What is the capacity of my Kenmore washer?


3.2cu ft.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 26, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore series 80 washer only works on heavy duty cycle.


bad transmission,,check voltage...below 110 with load and water pressure switch or hose defective..

Dec 24, 2008 | Kenmore 24902 Top Load Washer

2 Answers

Kenmore series 80 washer only works right on hevy duty load


CHECK SEE IF MOTOR IS SEIZED BY TIPPING MACHINE FORWARD AND SEE IF YOU CAN TURN THE MOTOR BY HAND. IF MOTOR TURNS FREELY , YOU HAVE A START CAPACITOR PROBLEM.

FXIT

Nov 20, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 25842 Top Load Washer Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2128 Answers

fordexpert

Level 3 Expert

5495 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...