Question about Samsung ES65 Digital Camera

1 Answer

ES65 restore firmware

My ES65 Camera Less is poped up and not Power On When i push power button. I don't know what's the wrong I think this is a firmware problem

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 6,702 Answers

Perhaps you still remember the add from IBM. Where the son says, or we put in the power plug!!! There are more errors with portable equipment caused by empty batteries than all other causes together.
Please remove the battery and charge the battery, before placing it back. And even when the charger indicates the battery is full, it is no 100 % guaranty it is. Even almost new batteries, can lose capacity within minutes. Those are defect and most of the time not to recover.
Be aware, to change firmware, if it should be available, you need a working camera. And a fully charged battery, because if during the update the battery runs out of power, your camera won't work again, without an intervention of the repair shop.
Make it a habit to charge the batterie at least every 3 months, even if you don't use the camera for a longer period.

Posted on Jan 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need print off manual for es65


Hello Mrs L Poole,
Download the manual here in pdf.Also,here are some video tutorials on the camera that you may find useful.

Hope this helps.Thanks1
Please rate this answer.

Dec 15, 2011 | Zeikos Samsung ES65 Digital Camera...

1 Answer

I pushed the wrong button on my remote and now my Akai flatscreen says no signal. But I don't know what button I pushed! Please help!


Unplug TV from power outlet ,wait 5 min and pluged back.Should go back to manufacture setup
Cheers

Aug 23, 2011 | Televison & Video

1 Answer

My Samsung es 65 digital camera's LCD blacked out after charging. What could be wrong?


What a misery! You are using your cell phone every day,
pushing it in your pockets, swapping your bags, content and purses and for
years it will do just everything you like or what it is designed for. Probably
product testing makes this item fit for such actions.



Samsung cameras react quiet a bit different! Treat them with
outmost respect and fragility and a month after purchase the LCD screen will
quit. Samsung explains that mistreatment would be the cause of it and the cost
of repair would amount to near the purchasing cost of the item! Google the
internet for "Samsung LCD screen not working" to make up your mind.

Samsungs whole product line seems to be crashing out on the
same issue. Is it worth to loose your money for bad product design?

Dec 18, 2010 | Samsung Battery Battery Charger for BP70A...

1 Answer

When i connect my ipod touch all it does its a little sound and then like 9 seconds after it does the same thing but itunes does not recognize my ipod and i dont know whats going on can someone help


Try restoring your iPod. Firstly, make sure you have the same (or above) version of firmware on your computer somewhere. By doing the next step, you need to know that all data and settings will be erased from your device. If you are OK with this, put your iTouch into DFU mode by:
1. Plugging your device into your computer.
2. Holding down the power button for 3 seconds.
3. Without releasing the power button, hold down the home button for 10 seconds.
4. Release the power button, but keep holding the home button for 30 seconds.

Next, go to the iPod Touch panel in iTunes, and click on the "Restore" button. Now follow the on-screen prompts.

If you want to restore your firmware to a specific firmware (advanced users), shift-click the "Restore" button and select an ISPW firmware file to update it to.

Jun 19, 2010 | Apple iPod touch

2 Answers

I have received an 8gb apple ipod touch..there is a restriction code on it..and i do not know the password..also when i plug it into my computer itunes does not come up at all


If the solution above doesn't work, try restoring your iPod. Firstly, make sure you have the same (or above) version of firmware on your computer somewhere. By doing the next step, you need to know that all data and settings will be erased from your device. If you are OK with this, put your iTouch into DFU mode by:
1. Plugging your device into your computer.
2. Holding down the power button for 3 seconds.
3. Without releasing the power button, hold down the home button for 10 seconds.
4. Release the power button, but keep holding the home button for 30 seconds.

Next, go to the iPod Touch panel in iTunes, and click on the "Restore" button. Now follow the on-screen prompts.

If you want to restore your firmware to a specific firmware (advanced users), shift-click the "Restore" button and select an ISPW firmware file to update it to.

Jun 14, 2010 | Apple iPod touch

1 Answer

Battery level don't show on display.


hi friend,

follow these steps
  1. Turn off your LCD display screen. I know this is hard—who likes shoving their face against the camera to compose a shot through the little viewfinder? But the LCD screen single-handed-ly drains a lot of power.
  2. Minimize the picture preview to the least amount of time possible—usually one second. This uses less LCD screen time, thus less power.
  3. Dim the brightness on your LCD screen. A dimmer display extends battery life by consuming less power to light the screen. This might make the display harder to see, but usually only in direct sunlight.
  4. Set the power saver to the least amount of time. Power saver lets your digital camera “sleep” when not in use, but doesn’t shut it down entirely. To “wake up” your digital camera, simply click the shutter button.
  5. Use your zoom as little as possible. The motor that moves the lens uses power. This also goes for repeatedly turning your digital camera on and off if it has an extend able lens.
  6. Turn off the continuous focus. Again, constantly using motors and electronics to ready your shot drastically minimizes battery life.
  7. Don’t push the shutter button half-way down until you’re ready to shoot. Pushing the shutter button (constantly resetting and refocusing) will drain battery life.
  8. Use the flash only when necessary. Your digital camera’s “auto flash” option should take care of this, but make sure your flash isn’t going off in broad daylight.
  9. Don’t delete pictures from your digital camera unless necessary. This consumes power. Wait until you download the pictures to your computer before deleting.
  10. This one’s basic, but charge your battery often. Lithium ion batteries, which most digital cameras use, don’t have “battery memory” like older alkaline. In fact, lithium ions work better and last longer if charged completely and regularly.

thank u for using fixya

regards,
sivaranjini

Aug 11, 2009 | Kodak EASYSHARE M1063 Digital Camera

1 Answer

Does not turn om


it's possible that you have a bad power switch circuit .
have you plugged an a/c charger into the ipod yet?
it should boot with an a/c charger.
also,
plug it into the computer and see if itune recognizes it, if so then your LCD is probably bad and you just don;t know it's on.

and if you have put the ipod into dfu mode it will come up on itunes as being in recovery mode.
go ahead and restore it, if you worried about a jailbreak, dont, you can jail break it easy after it's restored. but i would make sure you have a copy of your current firmware prior so you can restore to the some firmware or something close.
here is a link to a firmware for the 2g: ipod touch firmware

here are the steps to put the ipod in dfu mode:
Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Plug the usb cable into the Ipod and NOT into the computer.
Hold the Home Button down for 5 second (do not release it)
Then Press and hold the Power Button for approx 10 secs (count them out)
Your iPod will reboot.
Release the power button and continue holding the Home button for an additional 27secs.
You may see the screen go blank or not.
Plug the USB end into the computer with itunes open.
Your ipod will mount in recovery mode.
When you go to press restore press the SHIFT key when you hit restore and choose the firmware you have downloaded.


Mar 11, 2009 | Apple iPod touch

1 Answer

Restore still wont let me in


If you know how to put the phone in DFU mode your itunes will see it as in recovery mode and allow it to be restored.
If your planning on unlocking the phone for use without an iphone account, It's super important to restore the phone with firmware from 2.2 5G77 back. Don't restore to 2.2.1
Get the firmware here

For putting in DFU Mode
Plug the usb into the iphone and not into the computer.
1) turn your phone all the was off. (with the red slider)
2) Hold the home button for 5 second and then press and hold the power button for 7 seconds (Holding Both buttons down)
3)let go of the power button and keep holding the home button for an additional 27 second. your screen may go blank. don;t worry
now plug your usb into the computer with iTunes open.
iF it mounts in itunes it will say it's in recovery mode. press the shift key and press restore with you mouse choose the iphone firmware you downloaded from the link and restore.

I believe this solution will help, good luck!

Mar 01, 2009 | Apple iPhone Smartphone

1 Answer

Firmware update problem


Hello! I experienced the same problem. I did not updated the firme ware because my F828 already came with latest version. To view the firmeare information in your camera you must have the AC power adpater conected otherwise it wont show. This is all I know. From here I think you have only to follow the steps of SONY guide. Hope I could help in any way.

Sep 13, 2005 | Sony Cyber-Shot DSC-F828 Digital Camera

3 Answers

Power problem with 450


The LCD goes dark after the camera has been inactive for a time, to save battery. When that happens, you can easily restore the LCD display by half-pressing the shutter. If you want to, you can turn this off by selecting menu-setup-SleepTimeout and turn it off. (I don't recommend it, though, as the LCD always on will drain your battery).

Sep 08, 2005 | Pentax Optio 450 Digital Camera

Not finding what you are looking for?
Samsung ES65 Digital Camera Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...