Question about Vacuums
Posted by Anonymous on
Posted on Oct 25, 2017
Hello, this is Ava with Think Crucial.
You may find the User's Manual for your Hoover model by clicking the link below.
You can purchase a wide variety of high quality Hoover replacement parts for your Hoover vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
I hope this was helpful.
Think Crucial Customer Care
Posted on Oct 25, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: vacuum cleaner belt
Just take off the bottom plate covering the brush roll. The number of the belt is 38528040. Check the brush roll to make sure the ends turn freely, if not the replace it.
Posted on Mar 11, 2008
I see no one's given you a solution yet.
Well, I've searching online for Shampooer instructions and I found some at http://www.greatvacs.com/shampoo.shtml
As for the manual, I looked at kirby.com and found a #:
Hope those help.
Love in Christ, Passionatehearts
Posted on Jul 11, 2008
SOURCE: I own a self-propelled Hoover
Generic problem for all Vacuums
I own a self-propelled Hoover
Posted by gohornsgo on July 17, 2008
I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner's manual and was wondering how to clean the HEPA filter on this model (*this model uses a vacuum cleaner bag also).
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to clean the HEPA filter is to take it outside and use a blower over the trash can and blow off the dust and dirt, or use things like an old paint brush and brush it off, or you can vacuum it off with another canister vacuum or shop vac if you have an extra one. For the best filtration is to replace it, there fore the air flow will catch most of the dust and dirt and then you would have to watch how fast it gets dirty and then do the maintenance.
So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST
Thanks, Don the Vac Man
Go Ahead. Use Us.
Posted on Jul 17, 2008
very easy. you have clog. take the brush off look where the hole is thats where the clog is. it might be in there you might have to take the housing off of the motor
Posted on May 08, 2009
If you turn the vacuum over there will be (4) screws that hold on the base cover for the roller brush. Remove the screws and the cover and you can get to the belt(s). You can get replacement belts here:
Hoover Windtunnel Belts
Posted on Nov 19, 2009
Tips for a great answer:
Apr 23, 2016 | Hoover Vacuums
May 08, 2015 | Hoover SteamVac Carpet/Upholstery Deep...
May 09, 2010 | Hoover SteamVac Carpet/Upholstery Deep...
Nov 28, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Oct 22, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Oct 10, 2009 | Hoover F5906-900 Upright Steam Vacuum
Oct 04, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
112 people viewed this question
Usually answered in minutes!