Question about GE Electrical Supplies

Open Question

Error code A60 - GE Electrical Supplies

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wifi conneection

like my phone screen i cracked and i can use it and everything but i have these annoying black vertical lines its a at&t phone by the way

Jan 28, 2014 | Lenovo A60 MTK6573 3G Android 2.3 Wifi GPS...

1 Answer

Siemens a60 unlock code

If you want to unlock your Siemens A60 mobile phone from the network lock,you can get network unlock code from at reasonable price.Here they ask you to specify the country name,current network provider and IMEI number of your mobile phone.After specifying these details,they deliver an unlock code through email.Then you can unlock it using code by following the instructions given for your mobile phone from that site itself.

Jul 16, 2013 | Cell Phones

1 Answer

I have lenovo A60 i forget my password please help me to open it now

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

Oct 30, 2012 | Lenovo Computers & Internet

1 Answer

When i on my latop after 1 min or in starting give error and screen become green and restart why ? please help e my laptop is toshiba satellite a60. pleease help me and please reply me ons stylo...

Check your memory. If you have a faulty or substandard RAM chip, this is a likely cause. Also there may be an error on the hard drive. Run CHKDSK/F as soon as you get it to boot and save all of your data!!!!

Dec 23, 2010 | Toshiba Satellite A60 Notebook

1 Answer

E18 error

Lens errors (on older Canons this is known as an E18 error) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

Jul 21, 2009 | Canon PowerShot A60 Digital Camera

1 Answer

Camera Will not turn on

Pull the battery(s) out, pull the memory card out. With a compressed air can (for cleaning computers) blow out the battery compartment and very carefully clean out the memory card slot... don't bend any tabs or pins..
Also blow out any other openings around the batt compartment door/latch area.
reinstall batts and card.... any luck? Any error code on the screen?

May 27, 2009 | Canon PowerShot A60 Digital Camera

1 Answer

Toshiba satellite pro a60 power problem

did u install already all the drivers for the A60???

then, update / flash the bios...|PSA60U

Dec 30, 2008 | Toshiba Satellite A60 Notebook

1 Answer

Display Driver problem

You need to uninstall your ATI display driver and then download and reinstall the driver from here :

Nov 01, 2008 | Computers & Internet

1 Answer

Canon powershot A60. When the camera is turned on there is no image won't take shots, has a number on screen E18 and shuts down after a few seconds. Mike

E18 is an error code from self diagnostic system of the camera.if there is a malfunction in the lense assembly or the focus assembly then this error code appears. You have t show it at a repair shop.

Jul 17, 2008 | Cameras

2 Answers

Unlock phone

Siemens A60 can not be unlocked by code. It is necessary to load bootcore before entering unlock code to it and entering unlock code manually is not possible in A60. There is technic named "test point unlocking" for the same. For that needs some skill and software named SST( Siemens Service Tools). It is advisable to unlock it at technician's shop. If he need test-point picture then mail me. I will send it to you.

Jan 09, 2008 | Siemens A60

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Electrical Supplies Experts


Level 3 Expert

3287 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

ray gallant

Level 3 Expert

43020 Answers

Are you a GE Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides