Question about Xerox WorkCentre XD130DF Laser Printer

1 Answer

New toner xerox pe220 laser and it prints dark pages now

Just installed new toner in our xerox pe220 and now anything it prints is really, really dark

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 72 Answers

Make sure the electrodes between the drum unit and the printer is clean. Use a soft cloth or Qtip to clean, maybe slightly moisturized with vodka (not kidding). Vodka is actually perfect for cleaning most stuff that needs cleaning in printers, even the photosensitive layer on the drum if there happen to be dirt spots on it (gentle rubbing with Q-tip, very carefully).

Also clean the corona wire as per instructions in the manual, don't know your particular printer but there is usually some kind of knob on the drum unit that you are supposed to use for this purpose.

This should fix the problem.

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox phaser 6200DP says its out of ink (black and cyan) but there is still plenty of ink --- if the supplies usage page is full of dark color, why wont it print anything else?


You may need to go into the printer configurations menu and reset the toner levels. I have seen this option on my 8550 when I had to replace the toners.

Give that a try to see if it'll work.

Aug 11, 2011 | Xerox Phaser 8560DN Laser Printer

2 Answers

Xerox PE220 workcenter shows LSU Error message.


XEROX WORKCENTER PE220 , ITS SHOWING LSU ERROR . ITS NOT PRINTING OR COPYING ANYTHING . PLEASE GIVE SOLUTION

Dec 17, 2009 | Xerox Phaser 8500/DN Printer

1 Answer

Phaser 7300 - one color fading on diagnostics page


Are you using third party toner? That is one thing that causes that problem. Use only xerox toner.
The other thing is that your image unit could have come defected, if it was brand new. Try changing the image unit and that should fix that problem. Good luck. 016-1993-00 image unit & toner 016-1977-00

Oct 02, 2009 | Xerox Phaser 7300DN Laser Printer

2 Answers

Xerox pe220 cannot copy


i have the same problem too with my pe220. fortunately, i just purchased a new one which i planned to give to it to a relative, and I was able to figure out that the cause of the "function impossible" displayed.
the problem just occured this morning and I have tried downloading and updating the firmware too, clearing the memories, etc but cannot get the copier to work (can't print thru the pc also).

i then borrowed the new toner cartridge of the new pe220 and installed on my old one and i was able to print and copy again. the problem then is due to the chip memory.

the problem now is how to reset the serial eeprom chip in order to reuse the toner cartridge again.
hope this helps.

Feb 24, 2009 | Xerox WorkCentre 220 All-In-One Laser...

1 Answer

Xerox PE220 scan


you do it by install the driver and then the scanner cd and you have the possibilte to scan via pc

Feb 21, 2009 | Xerox WorkCentre PE16 All-In-One Laser...

2 Answers

Very faint printing in xerox 3117 laser printer


my ml 2010 never has printed as dark in the centre of the page even when the toner is full?

Sep 02, 2008 | Samsung ML 2010 Laser Printer

1 Answer

Xerox 6250dp


I had this problem when I used a generic toner. I installed a xerox cyan toner, then printed many sheets of a large blue rectangle. After about 15 pages the blue started to spread into the shape, after 30 pages the blue was back. Printing a lot of blue was necessary to get the new toner thru the system.

May 29, 2008 | Xerox Phaser 6250 Laser Printer

1 Answer

Xerox Phaser 6250 started printing bad


That really sounds like the imaging unit cleaner has an issue.
If you have one try the imaging unit, I really suspect that is your problem.
Black is Faded or Missing Step 1 Clean the Laser Windows and Remove Excess Toner From the Imaging Unit Step 2 Check or Replace the Imaging Unit Gear Retaining Pin Step 3 Replace the Imaging Unit (installation instructions) ic-film.gif
See if this link works. Xerox is infameous for these not working.
http://office.support.xerox.com/SRVS/CGI-BIN/WEBCGI.cgi/,/?St=842,E=0000000000019251353,K=6024,Sxi=13,Case=obj(19377)

Apr 08, 2008 | Xerox Phaser 6250DP Laser Printer

1 Answer

N17 printing "black" pages


If it prints fine at times, I would go to the Xerox.com site and dlwnload the latest firmware, and install that.
The problem really sounds like corrupted software in the printer.

Jan 30, 2008 | Xerox DocuPrint N17 Laser Printer

Not finding what you are looking for?
Xerox WorkCentre XD130DF Laser Printer Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...