Question about Computers & Internet

1 Answer

Blue screen when loading windows 2003 server

I am trying to load windows 2003 server on the Foxconn rs233 barebone PC. I have installed a sony dvd drive, a 250gb maxtor HDD sata 150. plus 2gb of memory. I have followed the instruction by foxconn for loading the drives for the PC to the $OEM$ folders. but the buils complains that it can't mount the sysem. Any advice. Regards Glen

Posted by on

  • Andy May 11, 2010

    Hi Glen,

    I'm not following you, what exactly is the system trying to mount?

    Regards

    Andy

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

If you get the blue screen code and type it in www.dogpile.com you can find some answers there, i would sugest that you reset all the bios settings to factory default, that normaly fixes the bluescreen on instalations, you may need the motherboard drivers for the sata and put them on floppy for the system to install the hard drive drivers.
one problem i do come accross is that sata drives are funny so in most bios settings there is a sata setting that switches back to IDE it was for backward compatability problems.
good luck

Posted on Aug 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I WANT TO INSTALL 2003 SERVER ON IBM X236 BUT IT IS SHOWING NO DRIVE PRESENT


Use the IBM configuration disk and it should be able to prepare the server for what ever OS you need to install. If you don't have it then, try redoing RAID and reformat the hard drives and try again..You can probably hit F6 during the initial portion of the install and supply the necessary SATA drivers on a floppy and get it to install. You will probably need a USB floppy though unless your server has a floppy drive.

Insert your Microsoft Server 2003 Installation disc into the CD/DVD-ROM drive and boot the server from the installation disc. Microsoft Setup will load the files it needs to perform an installation. Press "Enter" to setup and install Windows.

  • 2 Press "F8" to accept the Microsoft License Agreement.
  • 3 Create a new partition to install the operating system onto by selecting the "Unpartitioned Space" and pressing "C." If there is no unpartitioned space, highlight and delete all of the other partitions on the hard drive by pressing "D." Set the partition size to the "Maximum Size" and press "Enter."
  • 4 Format your new partition with the "NTFS" or the "NTFS (Quick)" option. Windows setup will format your hard drive and load the installation files. Your IBM Netfinity will restart and installation will continue.
  • 5 Select language and regional setup information, then press "Next." Enter your name and company name, then press "Next." Enter your Windows 2003 Server Product Key and press "Next."
  • 6 Select the licensing mode you would prefer to use and press "Next." Create an administrative account and password and press "Next." Enter the current time and time zone and press "Next."
  • 7 Setup your Network information by naming the server and defining how it will connect through the net. Press "Next" to navigate through the network setup screens. Windows Setup will finish the installation process and provide you with a log-in screen to use your computer.
  • If you delete old partitions from the hard drive to install Windows Server 2003, you will lose all information on those partitions.

    Jan 20, 2011 | IBM eServer xSeries 236

    2 Answers

    I just got a new PowerEdge T300 server with an embedded SATA Controller. I am attempting to install Windows 2003 on the server, but am getting a blue screen with an error IRQ_NOT_LESS_OR_EQUAL...


    The server should have came with an OpenManage CD.
    You boot to the CD and it walks you through setting up arrays and installing the OS.
    If you don't have the CD you can download it.
    Go to support.dell.com Drivers and Downloads and enter your server's Service Tag.
    Dell servers have lifetime phone support so give them a call if you need more assistance. (800) 945-3355

    If this helps please vote for my solution.

    Sep 02, 2010 | Dell PowerEdge T300 Server

    1 Answer

    I just got a new poweredge T300 server with an embedded sata Controller. I am attempting to install Windows 2003 on the server but am getting a blue screen with an error irq_not_less_or_equal (0x0000000A...


    Guest

    This stop code, "0x0000000A irql_not_less_or_equal" normally refers to a driver problem. So this is one of the few times where the files that the BSOD lists actually is important. Next I would try to boot the computer into safemode and reinstall/drivers related to that file to see if this make a difference.

    Let me know if you have any more problems or questions

    Issken
    http://www.fixya.com/users/issken

    Jul 04, 2010 | Dell PowerEdge T300 Server

    1 Answer

    Repeated failure to load Windows 7 HP


    Hi.
    Foxconn don't have this board on their list of their Windows 7 supported chipsets (which is hardly surprising), but as you state all your individual components should be perfectly OK with Windows 7 .
    I suggest you flash the Bios because Foxconn had to produce a new Bios for Vista in order for that OS to run correctly.

    Best of luck.

    Jan 31, 2010 | Foxconn P9657AA-8EKRS2H (6938279104065)...

    1 Answer

    Gateway e-9425r was setup to boot via PXE. I want to boot off a raid. Have 2 250gb sata drives in system. Loading raid driver from gateway site on floppy. Windows install and bios don't detect raid or...


    Copy RAID driver to mini diskette.
    Boot server using Windows Server 2003 CD
    The moment you see the blue setup screen press F6
    After the setup runs for a little while it will ask you if you have any additional drivers you need to install
    Then insert your mini diskette with the RAID driver and respond to prompts to load it.
    Windows should no recognize the RAID controller and let you complete the installation.

    Aug 10, 2009 | Gateway Computers & Internet

    1 Answer

    Not Installing Intel D945GCNL drivers for windows 2003 sp2 server


    The first thing you need to do is load the chipset drivers for the 945 chipset which is an executable file provided by Intel.com ~Steve Medley

    Nov 05, 2008 | Microsoft Windows Server Standard 2003 for...

    4 Answers

    Win 2003 Server Reboot


    Is it loading up to windows logo? if you are not getting blue screen error massage most of the time you can fix it on safe mode. try to get into safe mode and read all logs there you will see the problem.

    Dec 06, 2007 | Microsoft Windows Server Standard 2003 for...

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    177 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...