Como soluciono un E302 en una IR3300
0001 During shading, the shading processing does not end on the reader controller
PCB after 1 sec.
0002 During stream reading, the edge white addition processing does not end on
the rear controller PCB after 10 sec.
Main cause The CCD PCB is faulty. The wiring is faulty (short circuit, open circuit).
The reader controller PCB is faulty.
Are the connectors (J6001/J6002) on the CCD PCB and the connectors
(J5002/J5003) on the reader controller PCB connected securely?
NO: Connect the connectors securely.
2. CCD unit
Try replacing the CCD unit. Is the problem corrected?
3. Reader controller PCB, Main controller PCB
Try replacing the reader controller PCB. Is the problem corrected?
NO: Check the wiring; if normal, replace the main controller PCB.
i hope it will be help full to u.
Mar 06, 2009 |
Canon imageRUNNER 3300 All-In-One Laser...