Connect SBT214 headphones to computer ? - Sylvania Audio Players & Recorders

you can use the headphone out from your computer (this will turn off computer speakers) using a mini headphone to male rca adapter cable, and connect the rca ends to ANY input on your reciever

Not that i know of BUT you can get a hearing impaired device that connect to your phone that has a loud ringer and or flashing light.

Plug the headphones/speakers into the computer. Go into Control Panel -> Sounds and Audio Devices -> Audio Tab -> Sound playback -> Select your headphones from the drop-down list. Voila headphones/speakers that work.

When you connect headphones to your computer the computer will only send sound through the headphones and not allow sound to come out of the speakers. this is the way almost all audio drivers are setup, it detects the speakers and the headphones as 2 different devices and will only play sound through one (headphones first and if there are no headphones then speakers).

The only way I know to resolve this (and I hate this suggestion) is to purchase a headphone splitter. Connect the speakers and the headphones through the splitter, the quality of the splitter will determine the quality of the sound.

You could try going to the audio driver options (if there is any program installed by the audio driver) to see if you can get it to play through both but with both my Acer laptops I have been unsuccessful.

Hope this helps.

No it's not possible to have a sound. Because the HDMI and the Headphone (3.5mm jack) are on two different technologies.

The monitor does not have a way to convert the sound from HDMI to Headphone.

There could be a converter that might convert the sound signal from HDMI to headphone (but I'm not sure).

First go to control panel, sounds and audio devices
go to the audio tab and make sure that your usb device is selected for audio playback
then, unconnect the headphones and restart your computer
after restarting, connect the headphones and Speakers , it should work

look at the headphone jack, if it has 3 band, it is a stereo jack. the computer is mono.
you need a 2 band jack.
if you look at the jack on the computer, you will see blue(left) and green (right). you canna try to use the green jack.
go to any electroic shop and get a stereo to mono converter.

As soon as you connect your headphones to your laptop,some options wil come regarding the mike system,in that you choose the headphone option to get sound only in headphones OR By clicking on the speaker icon and selecting the Mixer button, you should be able to turn off the other outputs.

Try going to control panel->sounds->make the hands free audio the default.