Question about Refrigerators

1 Answer

How to fit a Zanussi fridge door seal

Hello I have bought a replacement door seal for the fridge compartment of a Zanussi ZF 45/30 side-by-side fridge freezer. It looks as if the inside moulding of the door panel screws off and the seal fits behind it. Is that true, or is there a different way to fit the new seal.
Thanks for you r help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 166 Answers

You mean you have a door gasket. A good, step-by-step article on this pesky concept of "panel-screw" gasket installation is found on this handy page:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Appliance_Zone_Refrigerator_Install_A_Refrigerator_Door_Gasket.htm

This should help!
Brad

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fitting new door seal


Hello,you mean you have a door gasket. A good, step-by-step article on this pesky concept of "panel-screw" gasket installation is found on this handy page:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Appliance_Zone_Refrigerator_Install


Thanks

May 28, 2010 | Zanussi FS1155W Front Load Washer

1 Answer

Can i purchase a replacement seal for around the


Hello,
That seal you should be able to order from any appliance spares supplier the Zannussi part number is. 3577252020. cost in euros. € 10.20 + vat.If it is the one I think it is then it is not easy to fit.The screws around the whole front panel have to be slackened off and the front prised forward dont take off fully pull old one off the new one has to be pushed in behind lip then fix all screws.may be easier with door off.
Hope I helped.

Apr 25, 2010 | Zanussi ZBF260 Electric Single Oven

1 Answer

IS IT EASY TO REPLACE THE DOOR SEAL/GASKET ON ZWF1430W


it is very very difficult to replace the door seal on a zanussi washing machine, its best fitted by an engineer

Feb 03, 2010 | Zanussi ZWF1430W Front Load Washer

1 Answer

Freezer door pops open when fridge door is closed.


well u need to check the rubber of ur freezer ;s door .some damaging in the rubber is causing the problem.

May 26, 2009 | Amana ARSE66MB Side by Side Refrigerator

1 Answer

Fitting an integrated fridge freezer!


Hi Gareth. I fitted a door to my Hotpoint hsz2321L today. I used self tapping screws through the brackets into the fridge door sides. Looking at the old fridge that came out showed that this was the method used previously. No seal is broken and so the fridge is working perfectly. I do have an issue re-fitting the door onto the new fridge though. The pivot hinge on my fridge doesnt give enough clearance and so it catches on the unit at the side of it. The old fridge (a Bosch) cad cabinet hinges that would sort of concertina out to give clearence. Anyway, good luck.

Nov 23, 2008 | GE Profile GCG1700LII 15" Built-In Trash...

1 Answer

Freezer Icing Up


Try contacting the hotline again and ask them if the freezer has a frost sensor on it. If it does, the sensor is not kicking the thermostat to allow for the unit to defrost.

Oct 21, 2007 | Zanussi ZEBF250W Bottom Freezer...

2 Answers

Fridge Door not shutting/sticking


the fridge door stays shut only by strip magnets inside the door seal. cause is possibly that the hinges are out of line or the cabinet distorted. try levelling the fridge and tilt slightly backwards

Apr 03, 2007 | Zanussi ZEBF250W Bottom Freezer...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

976 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Brian Coughlan

Level 2 Expert

275 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...