Question about HP LaserJet 4700N Printer

Open Question

49 4c06 error service HP LaserJet 4700N Printer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 300 Answers

SOURCE: 49.2F80 Service error

A critical firmware error has
occurred.
Try following these steps -
1. Press CANCEL JOB to clear the
print job from the printer
memory.
2. Turn the printer off, and then
turn the printer on again.
3. Go to http: www.hp.com/
support/lj2420.
Click Download Drivers and
Software
. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
upgrades.
4. Try printing a job from a
different software program. If
the job prints, go back to the
first program and try printing a
different file. If the message
appears only with a certain
software program or print job,
contact the software vendor
for assistance.
1. After performing the actions
listed in the preceding item, if
the message persists when
using different software
programs and attempting
specific print jobs, disconnect
all cables that connect the
printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs
or third-party DIMMs from the
printer. (Do not remove the
firmware DIMM in slot J1.)
4. Remove all of the
EIO devices from the printer.
5. Turn the printer on.
6. If the error message
disappears, reinstall
each DIMM and EIO device
individually, making sure to
turn the printer off and then
on again as you install each
device. To replace a DIMM,
see.
7. Replace the DIMM or
EIO device that caused the
error message.
8. Remember to reconnect all of
the cables that connect the
printer to the network or
computer.
9. If this error message persists,
replace the firmware DIMM.
10. Replace the formatter

Posted on Jul 18, 2008

leroyal
  • 2120 Answers

SOURCE: 49.c02 service error message on HP laserjet 4100

General printer error. Unplug the power cord for 10 seconds.

Posted on Feb 06, 2009

  • 102 Answers

SOURCE: Printer Hp Laserjet 3055 giving error message 5

If you scanner error 5 or printer hangs at scanner bulb warming up than the issue is with Scanning Assembly inside the printer and it is hardware issue.

Posted on Jul 02, 2009

  • 21 Answers

SOURCE: HP LaserJet M1522 with error 49

on hp.com you can update the firmware and that should take care of it. its a free download

Posted on Jan 07, 2010

  • 6 Answers

SOURCE: HP Color laser jet 4700n 49.3048 service error

The problem is usually caused by printing a PDF file with fonts/page size/ page formating errors which will cause the printer to display the 49.3048 error. The only way to use the printer is to POR or recycle the power and delete the print job from the server or spooling device and cancel it on the printer before the offending command is issued to the printer again. You can try updating the firmware to the latest version 46.140.5 from the HP website. MIke L.

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error message 49.4c02


Update the firmware on the HP Color LaserJet 4700 printer to version 20091125 46.120.4 or later. This new firmware resolves the issue.
do rate the solution if helped

Nov 23, 2010 | HP 4700N Color Q7492AABA Laser Printer

2 Answers

HP Color laser jet 4700n 49.3048 service error


The problem is usually caused by printing a PDF file with fonts/page size/ page formating errors which will cause the printer to display the 49.3048 error. The only way to use the printer is to POR or recycle the power and delete the print job from the server or spooling device and cancel it on the printer before the offending command is issued to the printer again. You can try updating the firmware to the latest version 46.140.5 from the HP website. MIke L.

Oct 12, 2009 | HP Color LaserJet CP4005dn Network Printer

1 Answer

Hp clj 4700n 59.30 error


Hi,
The error stands for:

59.XY PRINTER ERROR

X is in your case 3 : FUSER MOTOR STARTUP ERROR.
Y is in your case 0 : NO COLOR

The service manual says:

1. Reconnect the connectors for the fuser motor and on the DC controller PCB. Replace any damged parts.
2. Replace the fuser drive assembly.
3. Replace the DC controller PCB. Calibrate the printer after replacing the DC controller.

Best regards,
mannu_rakesh

Aug 22, 2009 | HP LaserJet 4700 Printer

1 Answer

Hp 4700n printer stuck on 128mb


reseat the main board then turn the printer on.you may need to turn the printer off and on a few times until it comes to ready.when it comes to ready you need to download the latest firmware from the hp site and install it to the printer

Apr 09, 2009 | HP LaserJet 4700N Printer

1 Answer

HP LaserJet 4700N


paper jam on tray 1. How to open the back part of the printer.

Oct 17, 2008 | HP LaserJet 4700N Printer

Not finding what you are looking for?
HP LaserJet 4700N Printer Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...