Question about Kenmore Dishwashers

Open Question

The normal wash light flashes on my Kenmore 66517029402 dishwasher. What causes this and how can I fix it? Thank you!

Posted by on

  • Wendy Dennis May 21, 2009

    I counted the flashes and it is either 13 or 14 very fast flashes.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Kenmore Ultra Wash Dishwasher: Lock On Button Issue

Have to hold the Air Dry button down til your finger hurts. Release button and the light will go off. The "4 second press" in the manual is incorrect!

Posted on Jun 24, 2008

ngfam1
  • 639 Answers

SOURCE: kenmore dishwasher blinking lights

Dear friend,
ngfam at you service! happy to assist!


The blinking lights are called codes and this is warning you that there is a technical problem. Probably an electronic failure some where. This can only be diagnosed by a trained service tech!

We sell appliances for 65 years and I recommend this nation wide Factory repair service!

Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Posted on Aug 29, 2008

SOURCE: Kenmore ultra wash dishwasher control lock light flashing

Hi jabberr216,

I'm Harvey the Master Plumber.

Your question is: You have an older model Kenmore ultra wash dishwasher model #15805890. The control lock light is flashing. No buttons are working. The dishwasher does not turn on. Any solutions?

Sure! Someone must have activated the lock. It is next to either the 'air dry' or 'heated dry' button.
Press and hold that button till the lock light goes out. About 6 seconds. That's it. It turns on the same way.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Posted on Oct 03, 2008

SOURCE: Kenmore ultra wash quiet guard 3 dishwasher problem

The sequence of "Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses)" worked for us. Many thanks!

Posted on Oct 14, 2008

  • 2 Answers

SOURCE: green light on kenmore dishwasher is flashing

I actually had to change the steps a little and this is what I did:

press heated dry
press normal wash
press heated dry again
press normal wash again
wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again

Started a cycle and began washing.....Thx

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Ultra wash mod.# 665-77963K703. normal wash light flashing. How do I reset.


How many times does it blink before pausing and repeating? 7 times? (That's a common problem - means "water not heating" error.) In some dishwashers, instead of pressing Heated Dry, Normal Wash, Heated Dry, Normal wash, you press the 3 left-most keys in the following order: 1, 2, 3, 1, 2, 3, 1, 2, 3. That will start the diagnostic cycle and clear the error, but if you don't find and fix the cause, the problem will come back the next time you run the DW. But before I try to explain how to fix the root cause, I would need to know how many times the light is blinking.

Jan 09, 2015 | Kenmore Dishwashers

1 Answer

KENMORE ELITE DISHWASHER - MULTI-LIGHTS FLASHING


Look at your manual, usually available on net for reading or downloading. Blink lights are often used to code out a problem with various combinations and repetition rates to indicate trouble code number for look-up in manual.

Feb 22, 2009 | Kenmore Dishwashers

2 Answers

Kenmore Elite Dishwasher clean light ind flashing and won't start


You will have to reset the console. To do this, close the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

Feb 17, 2009 | Kenmore 24 in. 15142 Built-in Dishwasher

3 Answers

Green light on kenmore dishwasher is flashing


I actually had to change the steps a little and this is what I did:

press heated dry
press normal wash
press heated dry again
press normal wash again
wait a few seconds
all the lights should come on
press cancel (should hear pump)
hit cancel again

Started a cycle and began washing.....Thx

Dec 31, 2008 | Kenmore 24 in. 16039 Built-in Dishwasher

12 Answers

Kenmore ultra wash quiet guard 3 dishwasher problem


call sears, 1-800-4MY-HOME. They have a trouble-shooting department that will get rid of this problem. It is caused by water temperature being wrong at the start of the cycle.... blah, blah, blah. The representative will tell you to push a certain set of buttons in a certain order and that unlocks the dishwasher.

Sorry I don't know the sequence

Jun 08, 2008 | Kenmore 24 in. 15689 Built-in Dishwasher

20 Answers

Kenmore dishwasher wont start blinking clean light


today January 9, 2009...blinking clean light, kenmore dishwasher would not run,,,the solution on Fixya ..."keep hitting normal -heated wash-normal -heated wash buttons over and over...unlocked the blinking green light problem. Dishwasher is running as I type this....will post again when I see the results of another washing tomorrow. H.T. Las Vegas Nv

Jan 18, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

Won't start


QuietGuard3: Clean light flashing 7 times? Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses) and that should fix it.

Jan 13, 2008 | Kenmore 24 in. 15689 Built-in Dishwasher

2 Answers

Turning on dishwasher


although the light may be a true indication of a pending problem, try this test: Find the circuit breaker and switch it off to remove power to washer for 30 minutes. Then power back up. Any changes? If light still on, then threat of trouble is real and must be fixed. Not sure what to CLEAN, though. Search for manual online...I'm sure Kenmore put that light on for a real purpose.

Jun 14, 2007 | Kenmore 24 in. 15252 / 15254 / 15259...

6 Answers

Kenmore 66516032400 Dishwasher


On another website, we found a reset code that works for our Kenmore, which I think is the same as yours. Hit Heated Dry, Normal Wash, Heated Dry, Normal Wash (one at a time, within six seconds).

Dec 05, 2006 | Kenmore 24 in. 16032 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...