Question about Brother IntelliFAX 4750 Plain Paper Laser Fax

Open Question

Confirmation page coming out the back

Why does the confirmation page come out the back and not the front?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I send my 4 digits as requested to Pay pal to confirm my credit card


If you are trying to pay with a credit card via PayPal, it asks for the same information as any secure site: the account number and CVV code. The CVV code for most cards (Visa, MC) is a three-digit number printed on the back of the card. For Amex, the confirmation code is the four-digit code on the front on the right side just above the account number.
If you think you are trying to pay for something via Paypal and the payment form does not allow you to put the CVV or confirmation number in properly, it might be a scam page. Check the URL for "https:" not "http:" If your don't see that "s" in front of the colon don't type in any card information - if you already have sent credit card information to a http (not https), contact your bank and tell them your card might be compromised.

Sep 14, 2014 | PayPal Accounts

2 Answers

I just replaced my ink on E238 laser printer and the yellow light is flashing. I have been on hold for 45 mins with you help line. Everything still prints but the light is flashing


Hi,

  1. Enter the printer's Configuration Menu. To do this:
  2. Turn off the printer.
  3. Open the front cover
  4. Press and hold the Continue () button.
  5. With the front cover open and the Continue button pressed down, power on the printer.
  6. Hold the Continue button until all the lights cycle.
  7. When just the Error light (!) is displayed, close the front cover. The top four lights of the operator panel should come on, indicating that the printer is in configuration mode.
  8. Print the Configuration Settings page. To do this:
    • Press and hold the Continue () button until all of the lights flash. This page lists the functions within the Configuration Menu. The functions are the nonĀ·indented items listed along the left edge of the page (along the bottom as printed from printer). They are also unshaded.

      Save this page for possible later use.
  9. Reset the photoconductor page count as follows:
  10. Press and release the Cancel button () to move sequentially from one menu item to another. NOTE: If you get lost, you can press and hold the Cancel button to jump to home state (top four lights on).
  11. Press and release the Cancel button until the Toner Low () light is the only light left on.
  12. Press and hold the Continue button until all of the lights flash.
  13. Then release the button. When the Toner Low light is once again the only light left on, the photoconductor page count should be reset to zero.
  14. Return the printer to normal mode. To do this:
    • Power it off for five seconds and then turn it back on.
  15. Print a menu settings page. To do this:
    • When the Ready () light is on, press the Continue button once. The Ready light will begin flashing and one or two pages will print out.
  16. Check the photoconductor reading on the menu settings page. To do this:
  17. Look for a section labeled Cartridge Information and locate the word Photoconductor under that heading.
  18. Confirm that the photoconductor level reading is OK or close to 100%.
  19. If the photoconductor reading is low, try printing 10 - 20 pages.
  20. Print the menu settings page(s) again. Confirm that the photoconductor level reading is OK or close to 100%.
  21. If the photoconductor reading is still low, refer to the Configuration Settings page you printed in Step 2.
  22. Confirm that Reset Photoconductor Counter is listed on the page.
    Also confirm that the light sequence for the photoconductor counter is the Toner Low light.
    • If the light sequence is correct, try repeating this entire procedure again from the beginning to reset the counter once more.
    • If a different light sequence is listed for the photoconductor counter, repeat the procedure but this time, instead of stopping at the Toner Low light (Step 3.2), press the Cancel button until the operator panel shows the light sequence that corresponds to the one listed on the Configuration Settings page. Continue with the remainder of the procedure as before to reset the counter again.
  23. If the photoconductor reading is still low after the page reset procedure has been performed twice, the printer may require service.

May 04, 2011 | Lexmark E238 Laser Printer

1 Answer

How do I print a confirmation page for this fax


1. First You need to press the additional functions button on the front.
2. Select Report Settings button
3. Select Printer button under the Print List menu
4. Press either PCL button or PS button to print the appropriate config page.
5. Press Configuration Page button
6. Select Yes button to confirm printing of config page.

Feb 19, 2010 | Canon LaserCLASS Fax 710 Printer

1 Answer

Resetting Servive C


Need to do service confirmed:
1- Door closed key position 1 (make sure you have the temp. screen up before starting) immediatly after turning to posistion one, press the reset button 3 times. and the battery voltage should come up.
2- Page down to serivce data menu.use plus and minus to select service data and hit page down to select.
3- Use plus and minus to scroll down to confirm overall service, then hit page down. It should say service confirmed.
4- Take the key out ant put back at position 2, the service message should be gone
Let me know how that works.

Aug 26, 2009 | 2007 Mercedes-Benz ML350

1 Answer

Hp officejet 6310 all-in-one send fax configure


1. Press Setup on the front panel of the All-in-One.
2. Press 2 to enter in to Print Report.
3. Press 1 to enter in to Fax Confirmation.
4. Press 1 to turn on Fax confirmation
5. Press 2 to enter in to Image on Fax Send Report
6. Press 1 to turn on Image on Fax Send Report

Jun 03, 2009 | HP Officejet 6310 All-In-One InkJet...

2 Answers

Email confirmation???


Try going to the email it's asking you to confirm. If the confirmation email isn't there, request it to resend the email.

May 18, 2009 | Flickr Photos

1 Answer

Output coming out the back


Hi Christi_Matt !!
the brother 4100 does not have any settings for that, all you have to do is to close the rear cover just move the machine arrown and you will notice that the cover is in the up position, make sure you move it down (lock it down) and as simple as that all your faxes should go to the front.
any other questions let me know.
just use my fixya ID at yahoo.... you know the rest
thank you.

Mar 24, 2009 | Brother IntelliFAX 4100 Laser Fax

1 Answer

I have just bought a new photoconducter unit and put it in the printer. Instructions talk about select, return buttons, menu buttons and exit buttons. My printer does not seem to have this. It only has the...


  1. Enter the printer's Configuration Menu. To do this:
  2. Turn off the printer.
  3. Open the front cover, as shown below.


    pattlnk_1122005_2111-enus20330_openfrontcover_e230_en_us.gif

  4. Press and hold the Continue (pattlnk_1122005_1857-enus20682_continuebuttonicon_e230_en_us.gif) button.
  5. With the front cover open and the Continue button pressed down, power on the printer.
  6. Hold the Continue button until all the lights cycle.
  7. When just the Error light (!) is displayed, close the front cover. The top four lights of the operator panel should come on, indicating that the printer is in configuration mode.
  8. Print the Configuration Settings page. To do this:
    • Press and hold the Continue (pattlnk_1122005_1857-enus20682_continuebuttonicon_e230_en_us.gif) button until all of the lights flash. This page lists the functions within the Configuration Menu. The functions are the non·indented items listed along the left edge of the page (along the bottom as printed from printer). They are also unshaded.

      Save this page for possible later use.
  9. Reset the photoconductor page count as follows:
  10. Press and release the Cancel button (pattlnk_1122005_1917-enus20682_cancelbuttonicon_e230_en_us.gif) to move sequentially from one menu item to another. NOTE: If you get lost, you can press and hold the Cancel button to jump to home state (top four lights on).
  11. Press and release the Cancel button until the Toner Low (pattlnk_1122005_215-enus20682_tonerlowbuttonicon_e230_en_us.gif) light is the only light left on.
  12. Press and hold the Continue button until all of the lights flash.
  13. Then release the button. When the Toner Low light is once again the only light left on, the photoconductor page count should be reset to zero.
  14. Return the printer to normal mode. To do this:
    • Power it off for five seconds and then turn it back on.
  15. Print a menu settings page. To do this:
    • When the Ready (pattlnk_1122005_218-enus20682_readylighticon_e230_en_us.gif) light is on, press the Continue button once. The Ready light will begin flashing and one or two pages will print out.
  16. Check the photoconductor reading on the menu settings page. To do this:
  17. Look for a section labeled Cartridge Information and locate the word Photoconductor under that heading.
  18. Confirm that the photoconductor level reading is OK or close to 100%.
  19. If the photoconductor reading is low, try printing 10 - 20 pages.
  20. Print the menu settings page(s) again. Confirm that the photoconductor level reading is OK or close to 100%.
  21. If the photoconductor reading is still low, refer to the Configuration Settings page you printed in Step 2.
  22. Confirm that Reset Photoconductor Counter is listed on the page.
    Also confirm that the light sequence for the photoconductor counter is the Toner Low light.
    • If the light sequence is correct, try repeating this entire procedure again from the beginning to reset the counter once more.
    • If a different light sequence is listed for the photoconductor counter, repeat the procedure but this time, instead of stopping at the Toner Low light (Step 3.2), press the Cancel button until the operator panel shows the light sequence that corresponds to the one listed on the Configuration Settings page. Continue with the remainder of the procedure as before to reset the counter again.
  23. If the photoconductor reading is still low after the page reset procedure has been performed twice, the printer may require service.

Jan 01, 2009 | Lexmark E238 Laser Printer

2 Answers

Confirmation Page


Check the link -- if this is the correct device page 44 of the first english manual has the code for changing the confirmation page setting.

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Fax-Printers/Plain-Paper-Fax/Copier/model.KX-FG2451

Dec 10, 2007 | Panasonic Panafax UF-550 Plain Paper Laser...

1 Answer

Confirmation pages


press function
press dataregistration
press set
use scroller up and down to select the function that you want to do, there's a lot of function, like user setting, report setting vvvvv.

select user settings, then scroll up or down
select activitiy report, then set it auto print off

will help you, play around with it.

Oct 22, 2007 | Canon FAXPHONE L80 Laser

Not finding what you are looking for?
Brother IntelliFAX 4750 Plain Paper Laser Fax Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

James Cagle
James Cagle

Level 2 Expert

455 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...