Question about Washing Machines

1 Answer

Washer will not advance in the rinse cycle,water just runs continuely.

My Amana top load washer will wash and timer will advance when it gets to the rinse cycle it will fill 1/2 way with water and never completly fill up and I have to advance the knob in order for it to spin otherwise the water would just continue to run.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

Check the drain hose it should be only 6 to 8 inch in your drain line if drain hose is all the way in the drain line correct it and you will be fine.

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash cycle continues to run constantly and does not move into the next rinse cycle


Hello,

does this happen no matter where the timer is set at,if that is the case the motor that advances the timer(timer motor) is bad and the timer needs to be replaced

Jul 26, 2011 | Frigidaire GLWS1749A Top Load Washer

1 Answer

My 21882 top load Kenmore washer will start the cycle but stops after filling up; i can restart the cycle by pushing the knob in and going a little further in the cycle then starting again. But after a...


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    My frigidaire front load washer will start a wash, complete the first cycle but then stop and flash all the lights and beep continously until I press "start" or "cancel". If I press "start" again it just...


    Hello there:
    If your cycle does not complete or The cycle doesn't advance
    When the cycle should advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. than check the cold water supply line and the filter

    Aug 15, 2010 | Frigidaire ATF6000ES Front Load Washer

    1 Answer

    TIMER ON WASHER MAKES A TICKING SOUND DURING CYCLE


    HI, this timer is faulty and, these are early warning signs of potential failuer of this device in the near future. i would prepare to replace the timer control soon. the actual mechanism is showing signs of breakdown.

    May 23, 2009 | Amana 3.2 cu. ft. Top-Load Washer

    1 Answer

    Frigidaire (LTF2940E) Washer starts, stops, starts, stops...


    The cycle doesn't advance When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

    • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


    • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    May 07, 2009 | Frigidaire GLTF2940ES Front Load Washer

    1 Answer

    Matayg Atlantis Washing Machine gets stuck in the Rinse Cycle and will continue to rinse for hours.


    This is the sign of a bad timer. It is not sensing how long it has been in the cycle. The timer is not advancing. Replace the timer.

    Feb 03, 2009 | Maytag Atlantis MAV6000 Top Load Washer

    1 Answer

    Ammana nav8805e


    If your washer fills but the timer cycle doesn't advance-replace the timer. If your washer fills the time cycle advance, and still not agitating your agitator is at fault.

    Sep 02, 2008 | Amana NAV5800A Top Load Washer

    1 Answer

    Whirlpool AWO3761 stuck mid-cycle


    The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

  • Jul 06, 2008 | Whirlpool AWM6100 Front Load Washer

    1 Answer

    70 series Kenmore washer


    POWERUP, YOUR WASHER COULD BE THE LID SWITCH OR THE COLD WATER VALVE. AT THE END OF THE WASH CYCLE, THE MOTOR WILL SPIN OUT THE WATER, BUT ONLY IF THE LID SWITCH IS ACTUATED. IF THE SWITCH IS BAD, IT WILL NOT SPIN OUT THE WATER AND THE TIMER WILL NOT ADVANCE FROM THAT POINT.
    IF THE WASHER SPINS, THE NEXT STEP IS TO FILL WITH WATER FOR THE RINSE CYCLE. MOST WASHERS USE COLD WATER FOR RINSES. IF THE COLD WATER VALVE IS RESTRICTED OR FAULTY, THE WASHER WON'T FILL. IF THE WASHER WON'T FILL, THE WATER LEVEL SWITCH WON'T ACTIVATE AND THE TIMER WON'T ADVANCE TO THE NEXT STEP.

    Mar 31, 2008 | Kenmore 22422 Top Load Washer

    2 Answers

    Won,t drain on rinse cycle


    There could be several causes for this, but probably a bad timer. One test for this...when it stops...is to turn it off...and turn the timer slightly clockwise...to the middle of the rinse cycle...and turn it back on. Does it run then?? Try advancing it to the spin cycle after the rinse. If it runs okay after you manually advance the knob...the timer is probably defective.

    Jan 13, 2008 | GE WNCD2050AWC Top Load Washer

    Not finding what you are looking for?
    Washing Machines Logo

    Related Topics:

    239 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Washing Machines Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Brad Brown

    Level 3 Expert

    16195 Answers

    Are you a Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...