Question about Dewalt DW715 Heavy Duty 12" Single - Bevel Compound Miter Saw

1 Answer

Mitre saw blows breaker - Dewalt DW715 Heavy Duty 12" Single - Bevel Compound Miter Saw

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 142 Answers

Bad cord, switch wired wrong, or bad motor. Pull the cover off the motor. Disconect the power. Sping the balde by hand and look at the bars on the comm, end of the armature. They should be evenly colored and the spacing between them should be even and clean cut looking. If there is heavy discoloration on one or two bars or heavy pitting between a couple bars the armature is likely bad.

Posted on Jan 27, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to lower toptable of a ryobi table mitre saw tms-305


http://ryobi.co.za/product/table-and-mitre-saw-combination-1800w-tms-305/
this saw has a 2 inch capacity. if you have say a 3 inch piece you use 2 passes of 1-1/2 each
regards
sir dana

Apr 25, 2017 | Ryobi Saws

1 Answer

I need a parts diagram for a mastercraft metal hand mitre saw?


Spares and parts diagrams here for all Mastercraft Mitre Saws.

Craftsman Miter Saw Parts

Dec 30, 2015 | Saws

1 Answer

My Mitre Saw won't start when trigger pulled, seams like a safety is on can't fine it thou.,


most saws have a breaker switch built into the motor.
check on the end of the motor close to where the power cord is attached.
there should be a small button that will pop out if it is popped, usually if the saw is overloaded.
when saw is cooled, push in on button, it will click & stay in when reset.

Jan 18, 2015 | Saws

1 Answer

Where do I get a bushing for the guard on a 10 inch mcculloch mitre saw


You probably mean a Milwaukee mitre saw. McCulloch does not make a mitre saw. Go to eReplacementparts.com and enter your make and model number. If they don't have it, its probably not available anywhere. You'll have to go to a machine shop instead. Look it the yellow pages for "Machine Shop".

Oct 04, 2014 | Saws

1 Answer

Ryobi mitre saw - saw dust has collected inside base making it extremely hard to move the saw angle horizontally.


Flip the saw upside down ,and loosen the bolt on the bottom. Now blow the sawdust out.

Sep 18, 2011 | Ryobi Garden

1 Answer

How do unlock mitre saw mastercraft 7-1/4-in mitre saw with laser its in the lock postion and wont release


There is a lever or push button by the hinge (where the saw pivots).Just push down on the top of the saw and release latch.To lock back down , just push down on the saw and put lever back in the lock position.

Jun 04, 2011 | Garden

1 Answer

Can't get the handle of a mastercraft compound mitre saw to open


Hi, If you look on the left side of the saw near where you see that it pivots to go up and down. You will see some type of knob that you can pull out...you will need to push down on the saw handle to allow this to happen.
Hope this helps, RSMITH972278 P.S. PLEASE RATE MY ASSISTANCE

Dec 29, 2009 | Saws

Not finding what you are looking for?
Dewalt DW715 Heavy Duty 12"  Single - Bevel Compound Miter Saw Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Parson's Repair...
Parson's Repair...

Level 2 Expert

206 Answers

JOHN LAPIER

Level 3 Expert

2422 Answers

Are you a Dewalt Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...