Question about Maytag MMV5207 Microwave Oven

2 Answers

Display blank, power source OK.

I cooked 5 batches bacon and the next morning the display was blank and powerless, checked outlet, OK.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The piece i need is. ( control board or system ) off microwave ovens,brand -atlantic breeze so i need help to by it

Posted on Jan 25, 2014

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

A thermal switch probably sensed the temp as too high and opened. If it did not reset when cooled down then the thermal switch is of the type that required replacement. Take it to a repair shop unless you are capable of making electrical checks and doing this safely.

Posted on Jan 02, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We were cooking a dish and stopped it at the mid point and to add some sauce and it would not restart. Clock and everything is out. Everything esle in house works, no circuit breakers were off. The Jenn...


The same thing happened to ours last night. We went to add another minute of cooking time and realized the oven was dead - no clock, no display of any kind, and no more cooking!

I've verified the power outlet is OK. Ideas???

Feb 19, 2010 | Jenn-Air M170 Microwave Oven

1 Answer

The glass turntable broke in 3 pieces this morning while cooking bacon. The bacon was not yet cooked or even hot. It broke into 3 large pieces. The unit is not at all new. Does this sound normal? Did I do...


The same thing happened to my microwave this morning while heating a cup of water, which broke into 3 pieces too before the water hadnt even hot.
Maybe you have already solved your problem and I just share my experience.
I am trying to call the manufacturer nearby and ask for the turntable, but I am afraid the new turntable dosent fit my a little bit old microwave.

Dec 27, 2009 | Microwave Ovens

1 Answer

While cooking the microwave stoped workin. no


There is probably a fuse inside that you can replace (unplug before opening case). If after replacing it blows again, you'll need to test for a short (control, magnatron, diode, capacitor, among other possibilities).

Oct 21, 2009 | Microwave Ovens

1 Answer

Microwave is not getting power


may i please ask you if you have a meter? check that 120 volts is going in? check the buttons that you press. also check the fuse check the mains cable for any breaks. also you may want to test the display to see if any power going in?

Apr 07, 2009 | Maytag MMV4205 Microwave Oven

1 Answer

Frigidere PLMV169


the internal fuse has blown, if your capable undo the screws on the casing and the check all the fuses

Jan 31, 2009 | Frigidaire PLMV169DC Microwave Oven

1 Answer

Total power loss during use


Check the voltage on the outlet,make sure it is 115v -- 122volts max, any less will cause it shut off, make sure the polarity off the outlet is correct and it is grounded,check all of your wiring connections, if all this is ok replace unit with a different unit or different supplier of unit

Jan 26, 2009 | Microwave Ovens

1 Answer

Whirlpool Microwave Model MH3184XP will not power up after power failure


The first thing to try is a "hard reset". Unplug it from the power line for a few minutes, plug it back in, set the clock, then try again. Let us know if the hard reset doesn't fix it.

If not, then you may have a problem is on the control panel, which we repair nationwide for $39.95 postpaid.

We have full details, plus *critical* safety, disassembly, and troubleshooting info at our site. You'll find a link to our site in our
listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

Feb 11, 2008 | Microwave Ovens

Not finding what you are looking for?
Maytag MMV5207 Microwave Oven Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Maytag Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...