Question about Briggs & Stratton Pressure Washer Projectpro Spray Nozzle
I dont have a manuel for my spirit clean shot briggs & stratton pressure washer psi 2050 and I need to change the oil but I cant find an oil plug could you instruct me on how to change the oil?
From the manual CleanShot 2050 Briggs and Stratton
Change Pump Oil
1. Drain engine oil and fuel from pressure washer
2. Use an 8 mm allen wrench to remove black pump oil cap between high pressure outlet and garden hose inlet.
3. Tiltl pressure washer to drain oil into an approved container until it drips slowly from pump.
4.Tilt pressure washer in opposite direction and empty premeasured pump oil bottle into same opening (a small funnel may be helpful) [THIS IS WHAT THE MANUAL SAYS-NOT CLEARLY WRITTEN IN MY OPINION OR WRITTEN BY SOMEONE FOR WHOM ENGLISH IS A SECOND LANGUAGE]
5. Install black pump oil cap and tighten firmly.
6. Set pressure washer in upright position. Add fuel and engine oil.
From the engine manual use synthetic 5w-30, 10w-30 from -20 degrees F to temperature of 100 degrees F.
Change oil after 5 hours of operation initially. Before tipping to drain oil, remove fuel from fuel tank by running until tank is empty. Remove oil cap and dipstick and tip engine. Keep spark plug side up. Or remove drain plug from the bottom of pressure washer with a ratchet and square extension and drain oil from bottom. (fuel does not have to be removed)
Posted on Apr 22, 2010
Various power washers are filled with oil after the the head with the pistons is removed. The head must be removed gradually against the strenght of the piston springs. Some washers must be placed upside down for this to be possible. When putting back the head, it must be screwed down squarely. Besides changing the oil, it is recommended that all seal be renewed. If old oil is found milkey, then it has water in it. The main cause for this are scratched pistons. If the pistons are scratched they must be renewed.
Posted on May 22, 2009
Suggestion but allways beware for motor parts allways on the serial number that it has no modification on some days on other model or type motor for the pressure washer . maybe the ignition coil can be sometimes modificated beware of that kind of parts .
CleanShot 2050PSI Owner Manual
Posted on Jan 02, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 25, 2013 | Garden
Dec 03, 2012 | Briggs & Stratton Measuring Tools &...
Dec 03, 2012 | Measuring Tools & Sensors
Jun 13, 2011 | Briggs & Stratton Gas Pressure Washer...
May 10, 2011 | Briggs & Stratton 2200 PSI Gas Pressure...
May 09, 2011 | Craftsman 2700 PSI,2.3 GPM Briggs &...
Aug 07, 2010 | Briggs Stratton 020273 Elite Series...
May 23, 2010 | Briggs & Stratton Briggs Stratton 2000...
Jan 16, 2010 | Briggs & Stratton Gas Pressure Washer...
8,466 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: