Question about Razor E100 Electric Scooter

1 Answer

Chain will not tighten and causes rear wheel to not move

Can tighten it back but keeps coming off everytime my daughter goes to push to ride it

Posted by on

1 Answer

Go to Home Depot and get a nut and lock washers. And double nut the axle with the lock washers.

Posted on Feb 16, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

308 Macdade
  • 18 Answers

SOURCE: when i push the thumb control down the motor comes

sounds like you need a new rear wheel as the wheel locking mech has been stripped or damaged where the cog is at. Can you move the wheel forward and backward with out the chain moving? If so that is your problem.

Posted on Nov 09, 2010

  • 18 Answers

SOURCE: when i push the thumb

If the sprocket and chain turn on the rear wheel, it sounds like the freewheel on the rear tire is faulty.

Posted on Nov 22, 2010

  • 1 Answer

SOURCE: Scooter seems louder than it should be... a sort

No it is not if you are riding it the chain can suddenly stop and you will be thrown off head first off of the scooter and die. DO NOT AND I MEAN DO NOT RIDE UNTILL IT IS PRACTICALLY SILENT. CAUSE ONE TIME I WAS RIDING IT, THE CHAIN STOPPED AND FLUNG ME OFF. I BROKE MY RIB CAGE, BOTH OF MY LEGS, AND MY ARMS. I HAD TO STAY IN THE HOSPITAL FOR A MONTH. THEY HAD TO PUT ME ON BREATHING TUBES BECAUSE MY LUNGS WERE CLASPING. I RECOVERED BUT NOW IM PARALYZED FROM THE WAIST DOWN.

Posted on Jun 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjust chain on a womans city ii 3 speed internal gear rear wheel


Loosen the rear wheel nuts. Move the axle forward to loosen or backward to tighten, keeping the tire spaced equally between frame and brake. Adjust so that chain is in that "sweet spot" between binding because it's too tight and slapping against the chain guard because it's too loose.

Some models have screws in the frame at the rear axle that make this job easier. Note that it's likely that you'll need to adjust the gear shift cable after moving the axle. Good luck, and happy riding!

Dec 14, 2014 | Schwinn City 1- 7 speed ladies 2013

1 Answer

I have a 20" inch girls kent trouble bike. How do I take the rear wheel off?


remove the coaster brake lever bolt. This is small bolt that holds the coaster brake lever to the left side chain stay. There will probably be a strap wrapped around the chain stay with bolt going through the strap and the lever. This usually requires a 10mm wrench (sometimes it is 8mm) for the nut and a Phillips or flat head screw driver (some times it's another 10mm bolt head).
The axle nuts are usually 15mm nuts. Loosen these (they usually don't need to be removed all the way) and push the wheel forward to put some slack in the chain. Lift the chain off the rear cog and you will be able to pull the wheel out of the drop outs.
To install, slide the wheel into the dropouts, put the chain back on the cog, pull back on the wheel and tighten the nuts finger tight. Reinstall the bolt through the coaster brake lever and then tighten the axle nuts, pull back on the wheel while tightening the nuts so the chain is tight. Then tighten up the coaster brake lever bolt. (if you tighten the axle nuts first, you won't be able to move the coaster brake lever into place to get the bolt in)

Aug 18, 2014 | Cycling

1 Answer

Comfort 050 technology attachment catches the rear wheel spokes and causes the chain to come off the spokes.


Matthew, The item giving you trouble is the rear derailler. It works by moving the chain in (closer to the spokes) and out (further away from the spokes) so that the chain can climb onto the next larger or smaller gear. Yours is apparently going too far in when you try to shift to the largest gear. There are a pair of adjusting screws that limit how far in and out the derailler will go. Use this link to find some great repair help. Just click on the derailer on the bike in the picture. Good luck.
http://www.parktool.com/blog/repair-help

Aug 27, 2012 | Cycling

1 Answer

Okay. Thanks to Guru, the handlebars were easy to fix. Maybe shouldn't try to ride this thing daily on the road, because now the chain came off. I put it back on, but need to see if there is an easy way...


hi, it sounds to me like the bike has been ridden hard and needs the chain replacing due to it strecthing. on the swing arm at the back is their two bolts sticking out the end of each swing arm their should be one in one side of the swing arm and one in the other side of the swing arm, this is right at the very back of the swing arm.
if you find these then these are the adjusters for the back wheel you then need to loosen the back wheel bolt but dont take it out then adjust these adjusters by the same amount do it in half a turn a time you need to do both the same else the back wheel wont be level keep tightening them in and this will then pull the wheel back and this will tighten the chain if its all ready adjusted fully then the chain is scrap and needs replacing, if you dont have adjusters then the chain needs replacing, it will keep coming off if its slack

you can cause damage to the bike if the chain comes off whilst riding at speed so it may be best to get the chain before you use the bike



Aug 15, 2010 | 2004 Suzuki DR 200 SE

1 Answer

The chain keeps coming off of my daughters MX500. Is there a way to tighten the chain or the chain tensioner. Is there something else that could be causing it to come off?


The chain usually comes off because it is not tight enough or the chain is not aligned correctly with the sprockets. Check the chain tensioner to see if it is keeping the chain tight and not moving even though it is tight, if it loosens, replace the tensioner. Check the chain for any broken or worn spots or links, if any are found replace the chain.

Jun 15, 2010 | Razor MX500 Dirt Rocket

1 Answer

Chain fell off poll, trying to figure out how to put it back on.


On the side of the saw where the bar (what the chain goes around/rides on) where it connects to the saw there are a couple nuts. Loosen them up, push the bar back towards the saw to put slack in the chain, wrap the chair around the bar making sure the bottom of the chain is in the groove on the bar and tip of the bar, then push the bar forwards away from the saw to take out the slack in the chain. Hold it tight and tighten up the two nuts. Depending on your model of pole saw, you may have only one nut and a plastic guide that keeps it straight. Same concept though. Loosen the nut, push bar in, put chain on, pull bar out, tighten nut.
If you've ever done it on a bicycle, it's the same concept. Loosen nuts on back wheel, push tire forwards and chain gets loose. Pull it backwards and chain gets tight.

May 11, 2010 | Remington Polesaw Wizard

1 Answer

Loose chain


Loosen the axle nut and the lock nuts for the chain adjusters on each side of the swingarm. Turn the adjuster to move the rear wheel to the rear to tighten the chain.

You want to adjust the chain so that you have 1 inch up and down play in the chain. By this I mean 1/2" above center and 1/2" below center of the chain as it sits on the bike, 1" up and down inclusive. Adjustment should be made at the point where the chain is the tightest. Roll the rear wheel while checking the chain tension. Find the tightest point to make your adjustment.

Move both chain adjusters the same amount to keep wheel straight within the swingarm. Once adjusted, roll the wheel a couple of turns and check the adjustment of the chain again. Once finished, tighten adjuster lock nuts and retorque the axle nut to 50 foot pounds of torque.

Good Luck, Steve

May 09, 2010 | 1993 Harley Davidson XLH Sportster 883

1 Answer

Chain keeps fallin off!


Does the rear wheel go on such that you can adjust it to take any play out of the chain? If so, turn the bike upside down or put it on a bike stand. Loosen the back wheel and pull it so that the chain is tighter and then tighten the wheel. There are other possible causes but I suspect this since you recently removed the wheel. Also I'm not sure how often the chain falls off. If this doesn't work, ask again and let us know how often its coming off. Good luck!

Mar 15, 2010 | Schwinn Windwood 26 Women s Cruiser...

4 Answers

How do i tighten the chain on 2002 yz250?


  • Loosen off the axle nut (B) until it is only lightly tightened. Wind out the chain adjuster bolts (C) evenly on both sides until you reach the desired tension. You will see the top of the chain rise as you wind out the adjuster bolts.on pic below

Once you reach the correct tension, make sure both sides are evenly spaced (using the marker grooves on the adjuster blocks). Squeeze the chain against the swingarm with your hand to hold everything in place and tighten up the axle nut.Tighten up the chain adjuster lock nuts. Now you're ready to ride!
  • Tighten up the chain adjuster lock nuts and thats it buddy measure the chain on the swing anr amr it should be 45mm slack on the swing and arm where the chain slider is 54159bf.jpg

Oct 03, 2009 | 2003 Yamaha YZ 250

1 Answer

Drive chain goes loose and tight on back wheel turn


No.That was the problem.The chain and the sprockets needed to be renewed.
When you will take, the rear sprocket's base, off the axle check it's bearing.Just put your finger in and turn it slowly to see if it "locks" instantly.It will be nice if you renew it now that you disassembling the chain drive system.

Jun 07, 2009 | 2002 Honda CBR 600 F(4)i

Not finding what you are looking for?
Razor E100 Electric Scooter Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Razor Toys Experts

Clif Roberts

Level 2 Expert

89 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

jasiel murphy

Level 2 Expert

94 Answers

Are you a Razor Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...