Issue with the push button to power my audiosonic 1080p action cam

I could not find this model. Following are available manuals. Select the manual that resembles to your device and see the instructions. It will help you to resolve your issue.

AudioSonic Clock Radio User Manuals Download ' ManualsLib

AudioSonic clock radio manuals

hi,
in the menu you will get option on WiFi, activate, then test with your mobile phone whether it receives the cams WiFi signals.

Hi,
Hope you got helpful info from our expert to solve your tv issue, if you still need further help, let me know to assist you further along with info what actions have been taken to fix the problem.
Thanks.

Hi Sturdygirrrl
Read your issue.
Please try the following...
1. Unplug the Power cable.
2. Press and hold down the On/ Resume Button for the next 35 seconds.
3. then release the button.
4. Plugin the power cable and the power on the printer.
5. Check your issue again.

Thanks & Regards
Ashish Rohilla

HI. This actual code cannot be cleared by pushing the Clear/off button. This actual button will usually be located on the touch pad and is a basic cancel button. You can try to reset the entire control board by simply unplugging the unit for 5 minutes. This may correct the issue. If resetting dose not correct this fault, the necessary actions are to have the defective main PCB replaced, asap.

F1 - Defective control board(PCB)

It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

http://www.fixya.com/support/t5998845-error_code_6c10_mean
Hope this helps.

put your ps3 in standby (solid red light), and then hold the power button until it beeps a second time. then the picture should come up.

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
5. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

HELLO, I DID A LITTLE RESEARCH FOR YOU AND FOUND IN YOUR MANUAL ON PG 103 IT STATES "RES OF 1080P ARE NOT HANDLED"