Question about Car Audio & Video

1 Answer

Hi what amp do i use on my starsound ssw-f1-1242 slim sub

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 111 Answers

Any amplifier u use will make the sub work ( if configured for subwoofer play)

my recommendation is that u use between 400watt rms to 1000watt rms ( the smaller the box used for the sub, the more power you can give it)

please note though that playing at high power levels exceeding manufacturers specs needs someone who knows what they are doing (when it sounds distorted decrees power)

also make sure to match the headunits output voltage to the amplifiers voltage (eg. if the headunit output is 4 volt, then make sure to adjust the sensitivity on the amplifier to be at 4 volt as well)

hope this helps and let me know if you have any other question

Posted on Jan 05, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the Specs for Digital starsound 12" ssw-f1-1242?


Starsound 12" 2000w Subwoofer
- 700rms
- stamped slim steel basket
- dual 4ohm 2" ASV voice coil
- 40 oz magnet structure
- rubber gasket ring
- silver push terminal
Not that good of quality speakers. You would be lucky if they lasted a couple months pushing 700 watts rms.

Jul 06, 2014 | Orion HCCA 12D Car Speaker

1 Answer

Owners manual for ssa -s1d 7800 starsound amp


Try to locate their website, and look for it there.

Jun 05, 2014 | Audio Players & Recorders

1 Answer

Sound cuts out


Not a PC Laptop question. Also I doubt you have an 11000 watt amplifier.

Mar 26, 2014 | Computers & Internet

1 Answer

Hi Guys I have an Starsound SSA-4495 series amp,


seems that the amp is fried, have it repaired.

Sep 16, 2013 | Car Audio & Video

1 Answer

I need help on sound built in


u may be able to custom fir the 6x9 into the rear of the vehicle, if you don't want to do that, you may be able to fit them into the spots in the doors, but that still may be a custom job. u could always go with boxes, individual boxes that you could put on the floor on maybe on the back deck where usually the 6x9s would be located. if you dont like that idea, you might try a body shop or electronics retailer because there is definitely a way to fit those speakers in the doors or on the rear deck, it just won't be an easy job for a beginner, you have to cut holes

Aug 09, 2009 | Car Audio & Video

1 Answer

Hi to everyone. I have a jensen XS - JA485 1500W amplifier pushing a pair of pioneer 6x9 440W speakers and a set of Starsound digital splits for the front. The guys that installed the sound did not set the...


You can't drive a Pinto at 150 miles per hour without breaking it, you need to get more speakers. a possible solution will be to add a 100 microfarad non polar 200 volts capacitor in series with the speakers to cut the low frequency and use a separate sub for the bass.

Apr 09, 2009 | Jensen Car Audio & Video

1 Answer

Counter Strike Hack error


try hacks like HOOK BADBOY open ur counter stirke then double click the hack

Jan 04, 2009 | 321studios Games X Copy (900242) for PC

1 Answer

I want to upgrade my Kenwood KDC-MP435U sound


1. your charging system is your only limitation for watts but you can add plenty without upgrading it. i'd say 1,000 watts max on the stock batter and alternator with large power and ground cables of at least 4 gauge.

2. yes. using your subwoofer rca outputs.

3. for a subwoofer you should always ad an amp. i'd say a 3-400 watt amp is fine to match up with you kenwood speakers. you will need a small sub to fit in there or maybe one slim enclosure behind each seat with slim 8" subs

Jan 03, 2009 | Kenwood KDC-MP435U CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...