Err 999 code on Avery L116 balance - Avery Computers & Internet

Contact Avery for a local repair facility. This is interesting!

https://www.industry.gov.au/sites/default/files/nmi/certificates-approval/6_4A_3.pdf

I remember this scale as a kid in the 1960s buying 2 ounces or a quarter pound of sweets.

https://www.google.com/search?q=Avery+1215+BFH+Weighing+Scale

Avery Weigh-Tronix

Avery Weigh-Tronix https://www.averyweigh-tronix.com Avery Weigh-Tronix is one of the world's leading suppliers of weighing scales, systems and equipment. We offer a wide range of industrial weighing systems and ...

Lb (rather than L6) indicates a low battery. You need to replace the 9V battery in the carbon monoxide detector. The Err suggests an internal error but could just be due to the low battery.

If the Err persists after you replace the battery, press the peak level button (the right hand button) and check for an additional error code. If the Err message continues, replace the Night Hawk unit. If the unit is still under warranty, contact the manufacturer. Most of these units have a 10 year warranty. There are several models available from Kidde. The manual is available on the product site. For the KN-COPP-3 Night Hawk carbon monoxide detector, the documentation is available here: http://www.kidde.com/home-safety/en/us/products/fire-safety/co-alarms/kn-copp-3/ . Click on the Documents tab. The manual for the KN-COPP-3 999-0100 is here: http://www.utcccs-cdn.com/hvac/docs/2001/Public/06/User_Guide_KN-COPP-3_900-0100.pdf .

I hope this helps.

Cindy Wells

There is a link to this problem online:
AVERY L115 Error 999 Solution

avery berkel model L115 error code 999

Sn- 1045-1084-3377-5752-2191-9202
Actn- 6174-419-7802-6186-5959-1959-6234
ACt typ Normal 24:24
Need Authorization code Help me pls

The zero capture is out of the 2percent tolerance so the cell is either faulty or requires zeroing. Open the unit and press the micros itch on the left of the board. The display flashes s. Press the zero key to change to flashing E. Press store to scroll to zero balance. Press semi auto tare. This captures zero without clearing the span calibration. The display will scroll around for a short period when complete press store.. Release the micro switch and scale will go thru warm up routine then display zero. Hope this helps, regs Darren.

hi
The question you have asked is not clear and specific . i am really sorry i cant help with this question please be more specific so i can help you out


thanks

Try resetting the camera.

First a soft reset is to just replace the battery. If that doesn't work try a hard reset - on the bottom the other side to the battery flap.

You can reset the camera 2 ways... soft reset is to remove and replace the battery. To hard reset, there is a microswitch on the bottom of the camera body opposite from the battery compartment. Youll have to reset the camera's clock if you do this. If it still doesnt work, have a Nikon authorized camera shop look at it.

ERR (990) or ERR (999) are both error messages which are displayed when a sensor does not work normally due to dirtiness. For example, either may be caused by a dirty maintenance unit or clogged ink nozzles. It may be possible to resolve the issue by cleaning the device
look here for instructions:
http://www.ricoh-usa.com/support/knowledgebase.asp?tsn=Ricoh-USA