My D.C does not keep the date

try these coupla leads
http://www.devicemanuals.com/guide/Digital%20Cameras/Polaroid/Polaroid-a500-User-Guide-TlRVd016VT.html
http://www.manualnguide.com/manual-get/17789/
http://www.devicemanuals.com/guide/Digital%20Cameras/Polaroid/Polaroid-a500-QuickStart-Guide-TlRVd016WT.html
http://www.nodevice.com/user_manual/polaroid/digital_cameras_and_frames/a500.html
Some of these sites have buttons and promises about the millionth visitor and etc.
Don't click ANY of those.
If any of these sites ask for money or personal details, try another.
Regards Robyn

Next time you finish setting it, press the set/ok button twice.

you can download a manual for $4.99 here: http://manualsforall.com/polaroid/polaroid_a500_digitial_camera_user_manual.html

It looks like the date battery has dried out, check your user manual and try to replace with a new button battery.

well it could be replaced but to be honest you would be better off buying a new one it would cost you more to fix it than to buy a new one just like it

1. Turn on the camera.
2. Set the camera to Still Image mode.
3. Press the Flash button to cycle through the flash settings and select the one you need.
The flash range: 3 ft to 6.7 ft (1 m to 2 m).

To find Find Flash button, see user manual or download it here
http://lv.diplodocs.com/jim/POLAROID/A500-_E

Hi - You can download the manual from the link underlined in blue below:

Polaroid a500

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

In photo editing programs there are Hue settings where you can easily fix that problem. There are off course night lens filters but not for amateur cameras.

i cant get my vpc t-700 digital camera from saying no image i need to save my pictures thank you

What could be happening is the you mother board is bad already. Usually digital cameras like computers use a button cell battery inside to keep the bios in memory or the board uses the installed batteries to keep the bios in memory but at a very slow power consuption rate. Everything comes down to pretty much a bad circuit somewhere that is causing memory lost and high consuption of battery power.

Also i've noticed that a lot of people with this camera is having the same problem. This called be because of mass production you all could have a bad batch. Meaning your cameras came off the assembly line around the same time.