Question about Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

Do not start when start button is pressed. Seems power adapter K30266 is defective. Output should be 24V, but I get only 7.2V.

Canon PIXMA iP1800 do not start when I press the start button. Power adapter K30266 says that output is 24V 0.7A. I measured voltage at the conector and foubd 7.2V only. Is the power adaper defective? Foundryman - May 21,2009

Posted by on

  • cachimbo May 22, 2009

    This answer was fast! I would like to send my thanks to the person who promptly solved my doubt.

    Cachimbo.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 729 Answers

Power adapter is definitely defective if it only has 7.2 volts on it output. check if you have plugged it in the correct voltage!

Posted on May 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

This power adapter has standby mode (7,2V). When I connect second pin in output to + (VCC) it's give 24V in on mode (pins 1, 3).
May be it's useful to someone...

Posted on Dec 07, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REPER AC ADAPTER K30263


K30263 Adapter..... is REPER "REPAIR"
CANON K30263 AC ADAPTER 32VDC 0.9A 24V Used POWER SUPPLY PIXMA M
$59.99
Condition : Used
Content : One Adapter only Manufacturer: CANON
Model Number: K30263
Part Number: QK1-2228-000-DB01-01
> Input Voltage: 120-240V~ 0.9A 50/60Hz
Output:
32V === 0.9A
24V === 0.5A
24V === 0.03A
Output Connector Type : 2 rectangle White Flat
1 x 2Pin, 1 x 7Pin [ • • ] [ • • • • • • • ]
Dimension: 17 x 10.5 x 7 cm approx.
Weight: 310 grams approx.
Compatible with: Canon Pixma MP830 Printer K1027 K10270 QC1-9029-DB01-01
http://azsurplus.com/index.php?main_page=product_info&cPath=1_24&products_id=1211&language=en

Feb 26, 2015 | Office Equipment & Supplies

1 Answer

Canon ip1800 reset


Unhook the power from the power outlet then press and hold down the power button

Sep 22, 2011 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Why i can't access my Canon pixma iP1980 printer? i need to print some of my paper works and immediately pass it onto my professor...


Canon Pixma iP1800
try to reset your printer

1. press power button while plug in the powerchord - green lamp.
2. while hold the power button press resume button twice - orange
blink and return to green.
3. release the power button, - the prnter will start.
4. try to print a page.
5. hope it's work.

Jul 17, 2011 | Canon Office Equipment & Supplies

2 Answers

Canon ip1800 ... ink absorber full


1. remove cartridges
2. unplug AC power
3. hold power button and plug AC power (keep holding power button.
4. press resume 4 times
The waste ink counter should be reset by now

i hope this helpfull
please rate very helpfull if you think this helpfull
thanks for using fixya

Jan 23, 2011 | Canon PIXMA iP1800 Printer

1 Answer

How to solve 5100 error of canon pixma ip1880 series printer


Follow this procedure:

1. Enter Service Mode: Hold Power button and plug a power cord, then push Resume button twice and release all buttons.
2. Free Download from Internet: GeneralTools for Canon Pixma IP1880
3. Starting GeneralTools
4. CHANGE USB PORT change into PORT of your printer
5. click lock release
6. click ip1800
7. click device id
8. clear waste ink counter by clicking MAIN & PLATEN
9. Check EEPROM Box
10. Click EEPROM Dump
Power off printer and all done. Work again!

Jan 11, 2011 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Canon ip1980 model printer's (ink absorber almost full problem)


release cable power and usb press and hold power button than plug cable power to printer port, pres and hold resume button 18 second or more, than plug usb cable into printer, press power button (printer off), and press again power button (prnter On), thats alll.... thas working to my printer (ip1800, ip1850, and ip1900, ip1980)

Nov 30, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

CANON ERROR E27


Canon MP140 Error Code injet printer reset procedure:

Canon waste ink tank problem.
1. Change the waste ink absorber

2. Reset waste ink tank counter

Go to the service menu;

1. With the printer power OFF , press the Power button while pressing and holding the Stop/ Reset button.
NEXT
2. When the Power is ON, hit the Stop/Reset button 2 times while pressing and holding the Power button.
NEXT
3. When releasing the Power button and the Stop / Reset button , the printer will go into a service mode.
NEXT
4 When the ON-OFF lights in Green, hit the Stop/Reset button the specified number of times according to the function listed in below.
NEXT
Each time the Stop/Reset button is pressed, the LED lights in orange and green, starting with orange.
NEXT
Hit 4 times for waste ink counter reset.

The number of the Reset button pressing LED
0 time ... Green Power off
1 time ... Orange Service pattern print
2 times ... Green EEPROM print
3 times ... Orange EEPROM reset (EEPROM reset)
4 times ... Green Waste ink counter reset


On the end press POWER button to exit .




FOR USE IN : Canon PIXMA iP1200, Canon PIXMA iP1600, Canon PIXMA iP1700, Canon iP1800, Canon PIXMA iP2600, iP6210D, PIXMA iP6220D, iP6310D, Canon PIXMA MP140, Canon PIXMA MP150, Canon PIXMA MP160, PIXMA MP170, Canon PIXMA MP180, MP210, Canon PIXMA MP450, MP460, MP470, Canon PIXMA MX300, Canon PIXMA MX310, Canon PIXMA MX470

Jul 31, 2010 | Acer Office Equipment & Supplies

1 Answer

My canon have error 1500 how can fix this


Waste tank full reset:
1 - press resume button and then press power button
2 - realese the resume button and press 2 more times then realese both
3 - press and release resume 4 times and power 2 times...

I hope that this help...

Mar 04, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

Power supply output voltage from the three wires.


please you buy any old printer same model
or reaper it change fuse

Aug 27, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

My printer wont power on


For Canon PIXMA iP1800 series No Power issue. Normally is either QK1-3130-000 AC POWER ADAPTER or QY5-0194-000 LOGIC BOARD.
You may find the parts at www.comcentre.com.my

Nov 18, 2008 | Canon PIXMA iP90 Mobile Printer

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

Related Topics:

429 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...