Question about Nordic Track NordicTrack - Commercial 2450

Open Question

Brand new 2450 does not slow down or speed up properly

Our machine is 1 month old and when I try to slow it down, it often does not respond, or will respond suddenly 10 seconds later. Sometimes this same thing happens when I'm trying to speed it up. Basically it's sometimes not responsive to increasing or decreasing speed.

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 218 Answers

SOURCE: The Nordic Track machine's controls seem to be

Remove the console from the treadmill and remove the back
remove and replace the ribbon cables that run from the keypads to the control board (they are flat plastic strips that push into the board).
remove and replace all the connections on the console
reattach the console and calibrate by doing the following:
1. With the key off press the speed + and stop buttons at the same time and hold
2. place the key on and release the buttons
3. press the stop key once
4. press the speed up til it reaches 85
5. if your max speed is 10 mph then it should read about 9.8-10.2

If the keys will not work then the console is bad and would need replaced.

Posted on Aug 11, 2010

AJIN G
  • 6694 Answers

SOURCE: reebok 5500C - when turn on treadmill and increase

hi,
Replase the IGBT on the aluminium heat sink. this problem will be solved. Adde the photo of IGBT .


ajin_g_5.jpg ok

Posted on Mar 08, 2011

ercupa190
  • 12223 Answers

SOURCE: My tread mill will sometimes slow down and then all of a sudden will speed up. It is around 8 years old and no maintenance has been done. What can be done to solve this issue?

CompartirFacebookTwitterGoogle+DeliciousDiggGoogle BookmarksMySpaceStumbleUponRedditMessengerVodpodYahoo BookmarksBeboMister-WongWordPressGoogle ReaderOrkutXINGEvernoteNetvibes ShareStrandsPosterousBusiness ExchangeArtoTipdSmakNewsPlurkAIMYahoo MessengerIdenti.caMozillacaBlogger PostTypePad PostBox.netNetlogTechnorati FavoritesCiteULikeJumptagsHemidemiFunPInstapaperPhoneFavsXerpiNetvouzWinkDiigoBibSonomyBlogMarksTailrankStartAidKledyKhabbrMeneameYoolinkBookmarks.frTechnotizieNewsVineMultiplyFriendFeedPlaxo PulsePingSquidooProtopage BookmarksBlinklistFavesYiGGWebnewsSegnaloPushaYouMobSlashdotFarkAllvoicesJamespotImera BrazilTwiddlaLinkaGoGounalogHuggDiglogNowPublicTumblrLiveJournalCurrentHelloTxtSpurlYampleOneviewLinkatopiaSimpyLinkedInBuddyMarksAsk.com MyStuffViadeoMapleWistsConnoteaBackflipMyLinkVaultSiteJotSphinnDZoneCare2 NewsHyvesSphere***** BrowserGabbrSymbaloo FeedsTagzaFolkdNewsTrustAmazon Wish ListPrintFriendlyRead It LaterTuentiEmailRediff MyPageGoogle GmailYahoo MailHotmailAOL MailAny email By Lockerz 1) probably a faulty speed sensoR 2) the speed sensor is not plugged in properly3) adjust the speed sensor 4) Use the calibration software under the hood and follow the step indicated for easy diagnostic and fix it. 5) Its also possibly a faulty main motor See the tip 6) control board or lower board faulty measure the 115Vac for input., and then output for +5Vdc,
12_27_2011_7_27_46_pm.jpghttp://www.fixya.com/support/r10786838-test_procedure_dc_motor

12_27_2011_7_30_32_pm.gifsincerely. Happy New Year. G-d bless you.
ernesto cuadra
managua, nicaragua. c.a.

Posted on Dec 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEPTUNE WASHER WILL NOT SPIN UP TO SPEED ON LAST CYCLE


sounds to me to be the programmer (mine went down last week) i bought a new machine as the part was a joke cost wise. if its old your probably find that other things will go wrong soon. now i have a fresh 3 yr warranty. would advise the same for you

Mar 08, 2014 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

New purchase?


If 'Internet Explorer is not responding' there can be many reasons why. It may be your internet connection is very busy and slow. It may be your computer is running slow. Do a Google search for 'broadband speed test' and see what speed you are getting. If it is less than 4 Mb/sec you have a slow connection. Try getting your present computer running at its best.
Delete all unnecessary software and old emails
Run a hard disk scan and de-fragment
Run a good anti-virus and spyware check
You can get 1000's of suggestions for the 'best machine'! But I guess on a new machine you want a proper keyboard, a reasonably sharp screen. PC Pro Magazine recommends ASUS Transformer Book T100 Windows 8.1 for 290 pounds, (400 dollars) as a Budget Buy and 5* rating.
If you want any more help with the details, please get back to me.

Mar 02, 2014 | HP Computers & Internet

2 Answers

Dell inspirion 1545 respond slow and shuts down even when on the desktop


The most probable, as far as I know, the hard drive is dying. Please test the laptop with a healthy (or brand new) hard drive.

Feb 18, 2014 | Dell Inspiron 6400 Notebook

2 Answers

Extremely slow running


Slow computer If you have a virus program installed, it is most likely is running a scan on your hard disk. It can slow down your computer especially if you have a large hard drive. After scanning is completed then the computer will be faster.
To make your computer (hard disk) lean and mean, uninstall any programs you do not use.
Also you need to maintain your hard disk by running Disk Cleanup this will remove old temp files and old compressed files etc.
This will reduce the number of files the virus scanner has to scan. Plus running Defrag. this makes your files contiguous so the system can access files off the hard drive quicker because it does not work as hard.. Disk Cleanup and Defrag should be carried out at least once a month.
If you have 512Mb of RAM installed then installing more RAM will speed up your computer. After installing your graphics card, you may need to disable the built-in graphics card in the BIOS for the new graphics card to work properly.

Mar 29, 2013 | eMachines T5274 Desktop PC

1 Answer

The thread keeps breaking while free motion quilting.It is a janome 1600p about 15 months old.It has been doing this for about a year and I have brought it into service at least 4 times for this...


Tough one! Did the machine ever work when it left the shop? if the shop said its working and its been in 4 times there could be a communication issue. I use schmetz brand quilting needles and have found some threaedds are so poor quality they cause this problem. Try a BEST quality thread, size 40 or 50....no bigger to start. Some folks buy big cones of thread and by the time they are used up the thread is brittle and weak. Work slowly...set the speed controller on the front of the machine at 1/2 to 2/3 speed and hold the pedal down to get a even speed. Dont move the fabric to fast, a slow smooth movement is whats needed. Practice on the same fabric and backing as you are trying to sew on. Bring it back to the dealer and ask them to try it. then you will have a better idea of whats what.

Derek

Jan 17, 2011 | Janome 1600P-DB Mechanical Sewing Machine

2 Answers

My Toro CCR 2450 GTS Snowthrower loses power after it gets warmed up. New spark plug and fresh gas with proper oil mix.Why?


Mine does same. Wait a half hour, restart, runs good for 20 minutes and slows again. Just had it in for a tune up. Machine is only three years old.

Dec 31, 2010 | Toro Lawn Mower With Toro Power Tools

1 Answer

JKExer 8030 overspeed problem


it's been two months if you still have that problem but would like some information if you want to write me detail your problem, and a photo of my email is cardiotech_me@hotmail.com machine maybe you can send a video tutorial how to solve that problem.

Jul 09, 2010 | Landice L7 LTd Pro Sports Trainer...

1 Answer

I HAVE A CELEBRITY DX SCOOTER, IT IS 4 YEARS OLD. I HAVE HAD NEW BATTERIES FITTED, BUT THIS LAST 3 MONTHS THE SCOOTER RUNS FROM NORMAL SPEED TO SLOW AND SLUGGISH THEN BACK TO NORMAL EVERY FEW MINUTES.CAN...


Hi John.
The problem could be a worn throttle pot ( wig wag ). Next time you are driving the scooter, try moving the ends of the speed lever slowly up and down, instead of in or out as you normally use it. If the throttle pot is worn, moving the lever this way will make the machine speed up or slow down.
Another cause might be a faulty battery lead connector or a faulty motor connector.
Good luck. Neil.

Jul 05, 2010 | Pride Celebrity X 4-Wheel Electric Scooter...

1 Answer

My Satillite laptop 2450-201 does not respond when asked for programmes and cannot be turned off through the normal procedure. It has a new battery but this has not solved the problem. It had got...


first disable your anti virus. You have a virus most likey so go to maleware bytes web site and download the latest free maleware removeal tool then do a disk clean up and do a disk defrag boot into safe mode and run a scan on your computer, if you have opened any e-mails attachments in the last two months there have been some nasty bugs going around, after running a scan in safe mode with maleware bytes get rid of any bugs you may find. then do a disk cleanup again and defrag in safe mode. once you have done this if the computer is acting ok then do a restore point at this time and restart the computer. I had got a couple of bugs a month or so ago and had the same thing happen and there was a new virus listed that was not detected bu other software than this brand. I hope this helps if not just post back here for more help on this issue. I am assuming your cpu fan is working normally and has been cleaned with compressed air.

Mar 17, 2010 | Computers & Internet

1 Answer

My Toro mower is 7 yrs old. 3 speeds, blade


I've noticed that when the blade get dull it work harder a cutting tall grass. I just put a new blade on mine and now it runs and sounds like a brand new mower. also if the inside of the deck is coated with old grass that makes a differance too

Jun 23, 2009 | Toro Lawn Mower With Toro Power Tools

Not finding what you are looking for?
Nordic Track NordicTrack - Commercial 2450 Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Paul Sikkema
Paul Sikkema

Level 2 Expert

171 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...