Question about Toshiba E-Studio 3511 Color Copier
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: C448 on Toshiba e-studio 2500c
C448 indicates Heater lamp lights continuously for a certain period of time when the pressure roller temperature during ready status is higher than the specified.
1. Clear status counter
Enter 08--> 400 --> change the value from "32" to "0", press Enter and restart MFP.
If occur again, u need to check followings:
1. Check the power supply and fuser unit
2. Check the LGC board
Posted on Mar 09, 2009
c380 indicates auto-toner error for black developer (K).
Is the harness between the LGC board and the developer unit drawer connector open-circuited?
Is any harness inside the developer unit or the auto-toner sensor harness open-circuited?
Is the auto-toner sensor connector or the connector CN341 on the LGC board disconnected?
IF connector no problems, then u probably need to replace the auto toner sensor.
Posted on May 28, 2009
SOURCE: Error code C970 on my
Check if the charger wire at the side door is broken or main charger grid is deformed.
& if any foreign matters are on the charger wire or main charger grid.
Posted on Jun 12, 2011
Tips for a great answer:
Nov 27, 2016 | Toshiba E-studio 2500c Color...
Oct 12, 2014 | Toshiba E-studio 2500c Color Copier...
May 08, 2014 | Office Equipment & Supplies
Dec 04, 2013 | Toshiba e-Studio 35 Copier
Oct 23, 2012 | Toshiba E-studio 2500 cbc939390, Copier,...
Jun 08, 2011 | Toshiba e-Studio 350 Copier
Aug 06, 2010 | Toshiba E-Studio 3511 Color Copier
Feb 04, 2009 | Toshiba E-Studio 161 Copier
35 people viewed this question
Usually answered in minutes!