Question about McCulloch Garden

1 Answer

How do you yune a muculloch mac 110 chainsaw

How do you tune a muculloch mac110 chainsaw

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 597 Answers

There should be a small screw near carburetor Labeled L and one H. Set the L or low jet first by screwing it in slowly until the engine drops RPM then start screwing it back out until it quits gaining rpms then screw it back in one half turn. Be careful on the high jet as it requires you to hold the throttle wide open. Do the same proceedure as low. Screw it in till drop them out till the RPM is maxed out then back in a half a turn. Try reving the engine several times and it shouldn't hesitate. If it does, open the H valve a small amount. Go back to idle after adjusting H valve and make sure the engine still idles smoothly or you'll need to re-adjust it again. After it's running well then adjust idle speed. Should be set a little fast but not enough that the chain turns while idling.

Posted on Jun 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to find parts for a MAC 110/Model 60016C McCulloch chainsaw


Here's a link to your chain saw. Model Profile MAC 110 Parts are very hard to find for these .I think they went out of business.

Oct 04, 2016 | McCulloch Garden

2 Answers

I asked how to replace the chain on a McCulloch Mac 110. The answer I got was remove bolts on cover. NO VISIBLE BOLTS!


that's a good old McCulloch 110 chainsaw... and
YOUR picture shows the NUT ... (also the one directly above)
Big as LIFE & twice as natural.

Every TREE-MAN I've ever known had the BAR wrench
BEFORE they climbed a tree... (+see below)

Mine are Stihl... 020.

Before that I had a baby SEARS... (really a Homelite).

RIGHT there in he picture you took...
Directly in line with the slot in the chain BAR is one "NUT"

AND an equal sized NUT on the end of the HANDLE

Get the book... or hire out the job if you are UNSURE... That saw is quite precious... simple & valuable.

Seriously!!

May 09, 2016 | McCulloch Garden

2 Answers

Looking for parts manual for muculloch mini mac 30 chainsaw.


http://www.mccullochpower.com/node7877.aspx

Try this link, they will need the actual model number of the chainsaw. Let me know if that helps.

Nov 21, 2010 | Garden

1 Answer

I have a McCulloch Mac 110 mini-Chain saw that needs a new chain blade. I believe it's a 12 inch... anything else I need to know to go buy a new bade?


Hello Kip;
If the new bar is not the same size as the old chains will not fit. Count the drive links on your chain.

74f1e6b.jpg
If your 44 your bar is 12", if your 49 your bar is 14", if your 54 your bar is 16" and finally if your 60 your bar is 18". If not of the following your chains will need to be professionally resized to fit (select 110 not Mac110 please).
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
I seriously doubt you saw needs an "Intenz" bar.
The Oregon part number you choose can easily be converted to a different bar manufacturer's part number.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Mar 25, 2010 | McCulloch Garden

1 Answer

Muculloch brush cutter wont start. No spark from plug.


If you have correctly diagnosed the problem as no spark, you will need to replace the ignition module. Unfortunately McCulloch dealers and McCulloch parts are very hard to find these days. If yoou do not have a dealer in yoour are who has the part you need, contact southern supply company at 205-833-2525 or email them at southern.supply@mindspring.com and I feel sure Jason or someone there can help you.

Sep 21, 2009 | McCulloch 16 In 4.5 Hp Electric Chainsaw...

1 Answer

Sawwon't start or run


On my 110 you take off the front section of the saw body to get et the fuel tank and remove it to get at the fuel line. There isn't much room to work in there so be patient.I'll bet your carb needs new diapragms I bought my manual on e-bay.hope this helps

Sep 08, 2009 | McCulloch Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

1,992 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

roeb

Level 2 Expert

263 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...