i have an epson stylus cx4200 my ink light was out so i bought a new black cartridge because that is all i needed to print. i now figure out that you can tell which cartridge is out, but i know need to print these papers due soon, i found a way in my printer options to print in just black my my ink light is stil on and my printer wont receive the document. any solutions? i would greatly appreciate it.
thanks in advance
you do need both cartridges in and with ink or the printer will not print to prevent damage to the print heads from running dry. The printer normally uses a small amount of coloured ink to "tone" blacks but if you leave it set to Black only it won't do this and in the future you should only have to replace the black cartridge.
I have a Canon ip 1600 and want to install bit don't have disk. When I manually install, this...
(More)
I have a Canon ip 1600 and want to install bit don't have disk. When I manually install, this printer is not on the list of printers. What Canon printer is compatible with the ip 1600?
i have just replaced black ink cartridge in Canon IP1600 but Printer won't recognise that its full...
(More)
i have just replaced black ink cartridge in Canon IP1600 but Printer won't recognise that its full what do i do.
my printer wont print my 4x6 photo paper anymore, but it still prints regular paper. every time i...
(More)
my printer wont print my 4x6 photo paper anymore, but it still prints regular paper. every time i try to print photo paper it tells me there is a paper jam. The paper does tend to get stuck but then it also gets pushed through but without printing anything, and the printer tells me that it will continue printing on the next page but it doesnt print on the next page, it just keeps repeating that pattern. Help!