Question about Cameras

2 Answers

My camera is cx7530 model I have put in new lithium batteries . It is very slow opening ip takes several minutes. The opening process has been intermittent sometimes ok but today has slowed up I love this camera and takes good photos,I am easily satisfied now that iam nearly 90 yrs old where has the time gone Hope you can solve Jack

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 987 Answers

Remove the memory card then try to power on ..then see if it is slow or not ...

Posted on May 30, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 355 Answers

Change image storage location to internal memory.. Use this card to take picture only...then see is camera still slow????

Posted on May 21, 2009

  • Rohit  Asthana
    Rohit Asthana May 21, 2009


    Before a digital camera is ready to take a
    picture, the electronics inside the camera must get ready to capture
    the picture and save it to the memory card or the internal camera
    memory.
    Press the shutter button half-way (to its first detent) to set the exposure and focus. When the ready light is green, continue pressing the shutter button completely down to take the picture. The picture is taken almost immediately.




×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't it recognize the correct battery?


hi,
If your camera do not recognize the original battery, it means some wrong information is stored in its software data, to override this please open the camera take out the small memory backup lithium battery, short the battery contact , after a five minutes connect that battery again.

Mar 02, 2016 | Sony Video Cameras

1 Answer

My pentax optio m20 wont turn on


Take out the batteries and clean contacts with alcohol and a Q-tip the long ones like a doctor uses are better. If the batteries are more
than two years old I would replace them. I take it that this camera
probably uses AA. Reg. Alkaline batteries would be alright just to
try it with if you get it working then I would put a set of lithium batteries in it as these last far longer.You can also buy rechargeable AA batteries. If it has a lithium L-Ion rechargeable battery pack and it
is several years old you may want to buy a new one for it. There is
several reasonable sellers on Ebay with the proper battery for your camera. If this don't solve your problem I would say the camera is done. In my experience these new cameras just don't last as long as the old manual film cameras.

Sep 02, 2011 | Pentax Optio M20 Digital Camera

1 Answer

I have a Kodak digital camera and when I turn it on it shuts off, like the batteries are low and they are not.


Try the following: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty)

Jan 28, 2010 | Kodak EasyShare CX7530 Digital Camera

1 Answer

Will not turn on


1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty)

Jan 21, 2010 | Kodak EasyShare CX7530 Digital Camera

1 Answer

My camara quickly runs out of battery


Here are the steps for the low power problem: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty)

Jan 21, 2010 | Kodak EasyShare CX7530 Digital Camera

1 Answer

We also got this problem with this camera. We


Here are the steps for the no power problem: 1. Make sure you will install a new or fully charged battery/batteries into your camera. Please use lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher). 2. Clean the battery contacts. a. Remove the battery/batteries and the memory card from your camera, then wipe the battery contacts with a soft, clean cloth. b. Reinstall the battery/batteries into your camera 3. Turn on your camera without the memory card. (If it works then it?s your memory card that is faulty)

Jan 07, 2010 | Kodak EasyShare CX7530 Digital Camera

1 Answer

Our EasyShare CX7530 will come on and then go right back off. You can not take pictures.


Make sure that you are installing a fresh/ full charged battery
AA non-rechargeable lithium batteries Ni-Mh or rechargeable Batteries (2000 M.Amp or higher).
Remove the memory card and the battery
Clean the metal contacts on the battery using a clean cloth
Use the camera w/o the memory card
Pls test with an alt. batt.
If you do not have access to a dif. battery.
Pls. take the batt out of the camera. Insert the charger into the unit from the main socket and turn the camera on. If the camera works you will need to replace the batt. If not you will need to order a No power repair.

If problem still persist call the Tech Number

Kodak Digital Imaging Support Centre can be contacted on any of the numbers below:
UK 0870 243 0270
International Toll line +44 (0) 131 458 6714

Oct 12, 2009 | Kodak EasyShare CX7530 Digital Camera

1 Answer

I Have Kodak Easy Share CX7530 Camera and when I turn it on, it automatically shuts itself back off. First I thought it was the batteries but I have put new ones in and the same thing happens. Do you have...


What type of batteries are you using? A lot of times in Kodak cameras, regular alkaline batteries won't work. I would suggest using lithium batteries like the energizer e2 ones. They're a little more expensive, but they should solve your problem.

Jun 22, 2008 | Cameras

1 Answer

Kodak EasyShare CX7530 digital problem


Mine did this until I folded up a small piece of paper to depress and hold the small lithium battery module detect switch inside the battery compartment, then it powered up fine for the first time in two years using NiMH batteries. After removing the paper (lithium detect OFF), it still works. Perhaps that recalibrated the low battery detect circuit?

May 29, 2008 | Kodak EasyShare CX7530 Digital Camera

8 Answers

Kodak Easyshare CX7530 won't stay powered on


SOLUTION: Fot the past two years, fully charged NiMH and new alkaline (generic and fresh Name Brand batteries) in my CX7530 always gave a red light and immediate power off -- symptoms of low batteries. Today I tried it again with the same problem. This time, I folded up a small piece of stiff paper to depress the small Lithium battery module detect switch in the battery compartment, and put my NiMH batteries back in -- it WORKED for the first time in two years! After removing the paper and reinserting the batteries, it still works. I suspect this somehow recalibrates the low battery detect circuit. I hope it helps you as well.



Oct 18, 2007 | Kodak EasyShare CX7530 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...