Question about YouTube Videos

1 Answer

1998 dodge pickup hood will not open - YouTube Videos

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

There is the latch release that u have to push up does it feel loose I have a 99 2500 and the latch keeper broke and allowed the latch to spin around and wouldn't release try to look and see it the latch is sideways or if there is a black plastic keeper near the bottom of the latch handle

Posted on Jan 22, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hood release on 1998 Dodge Grand Caravan isn't working


cable broken...replace. look under the top most fin of the grill and find wire to release...pull with pliers should release.

Apr 20, 2013 | 1998 Dodge Grand Caravan

1 Answer

What is firing order in dodge ram 1500 hemi


1998 Dodge RAM 1500 ½-Ton 4WD Pickup 5.9 liter V-8 VIN "Z"

1fa0727.gif



1998 Dodge RAM 1500 ½-Ton 4WD Pickup 5.2 liter V-8 VIN "Y"

22bfd79.gif

Hope this helped.

Mar 22, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

Our 1998 Dodge Ram 1500 van won't start arfter it has sat over night and it has rained. It takes an hour of trying to start it before it will fire up again. Any theories or solutions?


I've got a 95 Dodge 1500 Ram pickup. It has the same problem. I've got a 5.9 engine in it and the distributer is located right under the seam where the hood closes against the cowl panel. I suspect moisture is somehow working it's way into the distributer cap. Try replacing the distributer cap & rotor. If at night when you open the hood with engine running and don't see a "Light Show" from the wires I would spray the ends going in the cap with WD 40. If you do see a "Light Show" replace the wires, and then spray the ends with WD 40. It displaces water and moisture. This should cure your problem.

May 04, 2009 | 1999 Dodge Ram

1 Answer

Putting serpetine belt on my dodge ram conversion van


Should be a diagram on radiator core support,which is where the radiator bolts to, should be a diagram tag or when you open hood it may be on inside of hood look up when you open hood if its not on core support,should be on inside of hood.It will show exactly how the belt goes on

Apr 08, 2009 | 1998 Dodge Ram

1 Answer

Need diagram/schematic for serpentine belt replacement


Should be a tag on the core support somewhere that shows a diagram how to install your belt,usually its right on top where the radiator bolts to core support,open hood look down on top of support or its on the inside of hood open hood and look up see if theres a tag with a diagram of belt installation

Mar 22, 2009 | 1998 Dodge Ram

1 Answer

1998 s10 GMC Diamond edition blazer


I have to take WD40 every 6 months or so and spray moving parts and have a helper inside pulling handle to get it moving again, may have to press down on hood to get it open first.

Feb 05, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Can't open the hood


if the cable is busted inside the truck and there is still a piece to hold onto with a pair of plyers have someone push down on the hood while someone else is pulling on the cable with the plyers and if this fails take out the grille and use a wire coat hanger to get it unlatched

Jan 18, 2009 | 1987 Dodge Pickup 2WD

1 Answer

1998 S-10 blazer broken hood cable


i believe you can remove the grille without opening the hood and that will give you access to the hood release so you can open it manually and then fix the broken cable
Hope this helps!

Jan 15, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
YouTube Videos Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top YouTube Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Michael Terence...
Michael Terence...

Level 2 Expert

104 Answers

Mike

Level 3 Expert

4340 Answers

Are you a YouTube Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...