Question about HP Compaq Presario 2200 Notebook
I have power just wont boot up from CD
Can you get into the BIOS setup?
Some laptops allow you to select an alternative boot device by pressing F12 as you power up the laptop.
If not you will need to go into the BIOS setup and change the Boot up order and make the CD as the 1st boot device and the hard disk as the 2nd boot device.
You can change it back later if you wish, it is not critical.
Posted on May 21, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try these troubleshooting tips, they may help.
Power is on, but nobody is home….
This is a common problem I see a lot and there can be multiple problems here. First off, if you have lost the backlight on the LCD, you might not be able to see what is on the screen….LCD makers are making the panels very dark and if the light has failed it is very difficult to see what may be on the screen. Try shining a flashlight on the screen near the bottom and see if you can make out anything on it.
If not, attach the laptop to another monitor using the video output, you may have to toggle through the video outputs on the laptop by using the Fn key + one of the “F” keys….sometimes it is F4. If you see your desktop on the external monitor than your screen may have died but your video card is still good. In this case, change out the screen and inverter.
If you still can’t manage to see a display, then the other issues are a virus or malware that has changed the resolution to one the video card cannot process, in which case, the hard drive would have to be removed, attached to another computer and scanned to remove the bugs.
The video processor or video card has failed on the motherboard. If the computer has not been cleaned and has run hot, the processor can suffer significant damage that can result in this condition.
Work on simple first, until you get to complicated. In the end, worst case scenario is the main board has to be replaced.
Posted on Nov 07, 2009
Tips for a great answer:
Jan 20, 2011 | Acer Computers & Internet
Dec 30, 2010 | MPC Computers ClientPro 365 PC Desktop
Aug 22, 2010 | Computers & Internet
Mar 13, 2010 | Dell Dimension 4550 PC Desktop
Mar 09, 2010 | HP Pavilion m7560n PC Desktop
Sep 20, 2009 | ASUS P4S533-MX Motherboard
Jan 28, 2009 | Computers & Internet
334 people viewed this question
Usually answered in minutes!