Remote control manual

The TV code for the Bush BMKDVD40 for a universal remote control is 0376. You can usually find the code listed in the manual for your universal remote, or you can search for the code online by typing in the model number of your TV.

The BN59-00599A remote was included with several Samsung TV models, including the FP-T5084. While it can be used to control some other devices in your home theater system, it doesn't have codes for other TVs. See the user manual available at the support page: https://www.samsung.com/ca/support/model/FPT5084X/XAA/#downloadshttps://www.samsung.com/ca/support/model/FPT5084X/XAA/#downloads . The section on setting the remote for DVD players, VCRs and other devices starts on page 20.

I wish that I had better news for you. To control the Bush TV, look for a generic universal remote that was programmed more than 6 months after the TV was manufactured. (Not all remotes will list codes for Bush TVs, however the code for another brand may work.)

Cindy Wells

I can't find that model remote control manual.

Several other manuals from Bush might be of help.

https://www.manualslib.com/manual/460006/Bush-Dfta46r.html?page=8

https://www.manualslib.com/manual/984044/Bush-Eled55240fhdcntd.html?page=10

https://www.manualslib.com/manual/32280/Bush-1080p.html?page=7

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

try this BUSH Remote Controls BUSH Remote Control BUSH Remotes BUSH Remote

Hi
If there is a "Menu" button on the front panel of your TV, you can enter into its menu; surf trough and come towards tuning option. If there is no such button on the front panel of your TV, you have to buy one universal remote control to work with it. Be sure that buying new remote have setup codes for Bush TV. There are very rare remote models have setup codes for Bush Tv. Look at its manual before buying it. OK.

manual in PDF: http://www.hifi-remote.com/manuals/manual.shtml?urc22b_7

The following is an extract from the Bush DFTA13HD/ DFTA13HDSIL user manual, page 9;

1. Press STUDY key until Red LED remains lit (for about 3 seconds)
2. Point Converter (Bush) remote control to TV remote control directly, keep the distance about 1~3cm
3. Press the "Power" key at TV/s remote control to send signal to Converter remote control. The LED light will flash till steady. Then press "Power" key at Converter remote control. It will record the signal.
4. Now the Power key can turn on/off TV/s power
5. Repeat settings of learning for the other keys
You can repeat Step 3-4 for setting of learning for the other keys at TV remote control, such as VOL /-, CH /-, and F1, F2 are reserved for any other keys you want to set up.

Note:
1. When you have finished setting the learning keys, press the STUDY key to leave the learning status, and the LED light will turn off.
2. The learning function of this remote control may not support all types of TV sets, if you still can not control your TV after you have attempted the above steps, then this remote control may not support your TV or its remote control.

go to & ask for manul http://www.television-remotecontrols.co.uk/tv%20remote%20control%20model/bush.htm you will have to give model no.

i have a bush lcd tv 27 inch an its stuck on stand by i have an urc7740 one forall remote how can i take my tv of stand by with this remote.