Question about Motorola Mobility RAZR V3a Cellular Phone

1 Answer

Want to make sure the unlock is successful

I have a Motorola Razr2 phone, first I insert a SIM card which is not my network into the phone, it asks input unlock code, afetr I input the unlock code from MOTOROLA, it says unregisted SIM, does this means the phone is unlocked?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

THE PHONES ARE SOMETIMES PROPERITIESED ON WHICH NETWORK BUT IF YOUR SCREEN SAYS UNREGISTERED SIM IT MEANS YOUR CHIP IS USUALLY NOT COMPATABLE OR IT IS NO LONGER VALID

Posted on May 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unlock


To unlock Motorola Razr2 V8 use unlock code.Visit the site Simpleunlocking.com here you can get unlock code at low cost and unlock it from service provider lock easily.Then use any GSM network sim card.

Jul 09, 2013 | Motorola Mobility RAZR2 V8 Cellular Phone

Tip

How To Enter Unlock Code Into Motorola Mobile Phones Step By Step Instruction...


Model: All Motorola; check below for exception
1. Insert an unauthorized Sim Card and turn ON your phone
2. "Enter Subsidy Code" box appear
3. Enter Unlock Code

WARNING: If one of these messages appears:
- "Contact Service Provider"
- "Tamper Alter"
- "Wait before enter special Code"
- "Contact Service"
It's because you or somebody already enter too many wrong codes, you just have to let the phone ON at these errors message (do not close the phone if V3) and after 40 minutes to 12 hours, the message " Enter Subsidy Code" will appear again.

Model: A1000 and other A series model
1. Click on the Phone icon
2. Enter **057*
3. "Locking Enter Personalization" box appear
4. Enter Unlock Code
5. Press Ok

Model: L6i & L7i (NOT L6 and L7)
1. Press and hold * key and enter 787090
2. "Menu Network" box will appear
3. Select Yes
4. Press OK
5. Will ask for code
6. Enter Unlock Code

Model: All Motorola 3G network model
1. Enter **057*
2. Enter Unlock Code

Motorola CDMA & TDMA
1. Enter 74663# [Menu] [Menu] and you will be asked for a Subsidy Code
2. Enter Unlock Code
Unlock Motorola CLIQ (SIM Unlock) 1. Reboot your Motorola CLIQ with an unaccepted SIM card in.
*If the display reads "Enter Special Code", enter the unlock code and press "OK"
*If the display does not read "Enter Special code":
2. Press and hold the * key until an entry box is displayed.
3. Type *, #, 3, 2, # and press "OK"
4. Enter your Motorola CLIQ's unlock code and press "OK."
5. Your Motorola CLIQ should now display either "Completed" or "Deleted"

Motorola MPX
1. Insert an unauthorized Sim Card and turn ON your phone
2. If the phone is asking for NETWORK PIN
3. Enter the NETWORK PIN
4. If the phone is asking for SERVICE PROVIDER PIN
5. Enter the SERVICE PROVIDER PIN
6. Your phone is now unlocked

Network PUK
If the phone is asking for NETWORK PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see an Engineering Menu:
1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
5. Enter AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. Turn your phone off, take battery out. Put battery back in. Power on the phone and leave it for 40 minutes to 12 hours until the message "Enter NETWORK PUK" is gone. Now enter the Unlock Code and 00000000 (eight zero's) as a new password

Service Provider PUK
If the phone is asking for SERVICE PROVIDER PUK: Power on the phone with the original Sim Card in and wait till phone is fully powered on and you have access to menu. Enter *#**364# and press green button. You will get an error message and thereafter, you will see a Engineering Menu: 1. Select Options
2. Select GSM Test
3. Select Send AT command
4. Now you will see a new window Saying "Send AT Command"
5. Enter AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
6. Press send
If you get Response "0 []" phone is unlocked. If you get 1 error, then make sure you have typed the code correct and try the other code. If you do not have the original Sim Card or if the original Sim Card is not accepted because you flashed the phone with other firmware, then we cannot help you



You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.

on Apr 07, 2011 | Cell Phones

1 Answer

Bc50 subsidy password


Subsidy Password usually asks in Motorola phone.If it is a locked phone,you insert other network sim card without unlocking it,it will ask for subsidy code.BC50 is motorola phone battery type.So you need to specify the correct phone model,IMEI number,network and country it is locked now.Get subsidy code from the site Onlinegsmunlock.com and unlock your Motorola phone from network lock.Then use with any GSM network sim card.It will not ask for an unlock code.

Jul 04, 2013 | Cell Phones

1 Answer

How can i unlock my motorola clutch cellphone


Are you inserting CDMA network SIM card ?You can try to insert GSM network SIM card.But you need to unlock your phone from current network lock.To unlock your Motorola clutch[Motorola Clutch i465] cellphone from Network lock,you need an unlock code.To get this code at low cost visit the site Unlock-zone.com here you need to specify the IMEI number of your phone,Country,Network provider to which it is locked.Then they deliver the unlock code to you through E-mail.Using that code you can unlock your phone easily.After unlocking from Network lock,you can use any other country GSM network SIM card.

Apr 11, 2013 | Cell Phones

1 Answer

My motorola V3 has developed a problem.when switched on message reads insert sim. sim has been removed and reinserted several time without success. this start to happen after an overnight charge.The sim...


you can check it with other sim card ,if it remains the same problem ,it may be locked to particular network wont accept any sim card other than the particular network ,you can unlock it and used to other network,try here http://www.theunlockarena.com/motorola-motorazr-maxx-v3/rs13wp9/

Jan 02, 2011 | Motorola Mobility RAZR V3

2 Answers

When i insert any sim card it shows unregistered sim.


it may be due to network lock, contact service provider if it locked , you can get unlock codes here http://www.mobile-unlocker.com/
you need to specify the phone model and network provider

Dec 03, 2010 | Motorola Mobility RAZR2 V8 Cellular Phone

1 Answer

Insert sim


Is your sim card in the phone? Make sure it is inserted in there correctly and if it is and it still gives you that message the phone has a bad Sim card reader and although your sim is in the phone it is not reading it.

www.usedcellphoneshop.com

May 28, 2010 | Motorola Mobility RAZR2 v9 Cell Phone

1 Answer

Motorola razr2 v8 phone will not charge battery. Works on pc but now even that has stopped working.


REMOVE BATTERY
REMOVE SIM CARD
INSERT BATTERY
INSERT CHARGE LEAD
PUSH * & # TOGETHER - HOLD FOR 1 MIN

SHOULD START CHARGING - IT DID FOR ME!
REPLACE SIM CARD WHEN FULLY CHARGED QED

Mar 30, 2010 | Motorola Mobility RAZR2 V8 Cellular Phone

1 Answer

How do you send a text to all the people in a category?


  1. Insert the SIM card you wish to use.
  2. Turn the handset on.
  3. The phone will show "Enter Subsidy Code".
  4. Enter the unlock code we provided.
  5. If the phone does not ask for the code then try the following:
    • Insert the new SIM card.
    • Turn on your handset.
    • Press and hold the * key until a box appears.
    • Enter *#32#
    • Press OK
    • Enter the unlock code
    • The handset is then successfully unlocked.
    If you have a Motorola V10 and your phone is saying "subsidy lock enabled", please follow the instrucrtions below:
    When the message appears press continue. Then enter **057* and the phone will then ask you to enter the unlock code.


Jul 07, 2009 | Motorola Mobility RAZR2 V8 Cellular Phone

1 Answer

Moto RAZR2 for t-mobile want to use on att network....


Go to unlocktotalk.com
buy a code and when you insert the AT&T sim it will ask for the code.
enter the code and your all set

Good Luck with your unlocked Moto

May 27, 2009 | Motorola Mobility SLVR L7 Cellular Phone

Not finding what you are looking for?
Motorola Mobility RAZR V3a Cellular Phone Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

Rami Obeid

Level 1 Expert

16 Answers

Richard Lane

Level 2 Expert

94 Answers

Vernon Taylor

Level 3 Expert

3206 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...