Help me put new Frequencys in my scanner

http://www.radioreference.com/apps/db/?ctid=37

that is because you are trying to program frequencies into the scanner with hitting your program button...hit your program button.. its your prg..button when you hit your program button then try putting your freq in...

Go to RadioShack.com. The owner's manual is online for FREE ! ! ! !

Good Luck
OR click this link
http://www.radioshack.com/product/index.jsp?productId=3172613#tabsetBasic

There is no general reset function that will clear all of the frequencies (they're not codes) from your scanner, but there are two ways to clear individual frequencies:
1. Programming "0.0" (zero point zero) into a channel will remove the programmed frequency.
2. Programming a new frequency into any channel will remove/override the previously programmed frequency.

You can download and print the manual for your scanner, at no cost, here:
http://www.uniden.com/pdf/BC248CLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

There are several ways to program your scanner, so it's best that you refer to the owner's manual for detailed instructions. You can download/view/print the manual at:

http://uniden.com/pdf/BC350Aom.pdf

I know that most frequencys did change, I had the same problem when all the police went to digital, I had to put in new frequencys.

Hi - You can download the manual from the link underlined in blue below:

Pro-83

See pages 24, 25:



Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

one of the following should be the correct one, both are for the same model, but i believe there may have been submodels

http://www.uniden.com/pdf/bc60XLTom.pdf

http://www.racescanners.com/~draley/ScannerManuals/BC60XLT-1om.pdf

you can go to scanner master.com and get what frequencys you need. if this don't work let me know i will give you a new site.

How do I program my Uniden Bearcat BC 145xl? I lost the booklet.....